Hep2O straight tap connector with brass nut white 0.75x15mm
Watch video
Hover Over to Zoom In
Overview
- Easy to use convenient tap connector
- Hot and cold flexible push-fit plumbing system
- In4Sure joint recognition for secure joints
- Feel the rumble, leak free connection guaranteed
- Secure demounting with HepKey system
- 50 year industry leading guarantee
- Colour-coded packaging for easy identification - green 10mm, blue 15mm, purple 22mm and orange 28mm
- BS EN 7291 parts 1 and 2, WRAS approved
Technical specification
Diameter
15 mm
Length
64 mm
Connection Type
Push-Fit x BSP
Material
Plastic
Maximum Pressure
18 bar
Colour
White
Years Guaranteed
50
Type
Tap Connectors
Made To Order
N
Manufacturer Model No
HD25B/15W
Brand Name
Hep2O
Reviews
Be the first to review this product.
Compression Swivel Straight Tap Connector 15mm x 1/2in - Bag of 10
Compression Straight Swivel Tap Connector 15mm x 1/2" fittings can used on a wide range of applications including central heating and hot & cold water supplies
£53.16 per bag (Inc. VAT)
15mm Tap Connector x 3/4inch x 30cm
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£2.34 each (Inc. VAT)
15mm x 300mm Compression x 1/2 Inch Tap Connector
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
£6.13 per pair (Inc. VAT)
JG Speedfit female tap connector 15mm x 1/2inch
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£2.29 each (Inc. VAT)