Knauf Insulation FrameTherm Roll 35 6000mm x 1140mm x 90mm
Hover Over to Zoom In
Frequently bought together
Overview
- Designed to friction fit between timber studs, which prevents air movement and infiltration through or around the insulation, minimising heat loss.
- Ready-cut to allow quick and simple installation, maximising on-site efficiency when compared with alternative insulants.
- Rolls are fully cut into 2x570mm and 3x380mm to suit commonly used timber stud spacing.
Technical specification
Range Description
External Timber Frame Walls
Brand Name
Knauf Insulation
Length
6000 mm
Thickness
90 mm
Width
1200 mm
Material
Glass Mineral Wool
Usage
Timber Frame Walls - Built In, Pitched Roofs - Rafter Level
Coverage
6.84 m2
Fire Retardant
Y
Acoustic
Yes
Thermal Conductivity
0.035 W/mK
Pack Quantity
1
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
Type
Insulation Rolls
Data sheets
Reviews
Be the first to review this product.
75mm x 1200mm x 450mm Kingspan Kooltherm Partial Fill Cavity Wall Insulation K108
Kingspan Kooltherm K108 Cavity Board is a premium performance insulation with a fibre-free rigid thermoset phenolic core.
Kooltherm K108 is a premium performance partial fill cavity wall insulation solution. It has a thermal conductivity of 0.019 W/mK and can achieve the same wall U-value as alternative products with a thinner profile. Its low thermal conductivity can maximise usable internal floor space.
£144.64 per pack (Inc. VAT)
Actis Hybris Panels 105mm 4 Pack 5.49m2
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
£80.74 per pack (Inc. VAT)
Actis Hybris Panels 155mm 2 Pack 2.74m2
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
£61.25 per pack (Inc. VAT)
Ecotherm Eco-cavity 1200 x 450 x 75mm Cavity Wall Insulation CAV75
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.
£16.02 per sheet (Inc. VAT)