This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.
The GTV-CS Castellated In-Line Tile Vent is designed for three main purposes: Roof void ventilation; Mechanical extraction; Soil ventilation, all through a castellated roof covering. The in-line profile design of this vent tile makes it almost invisible when installed at either high or low level, with no unsightly hoods or external ducting on show from the exterior to maintain an unbroken appearance to the roofline.
The Easy-trim Peep Vents Functionally Provides Cavity Wall Drainage With An Inconspicous “peep” Profile On The Brick Wall Face. The Design Features Ribbing To Act As A Mortar Key For Secure Flooring, And A Small Angled Exit Hole To Facilitate Water Drainage Whilst Guarding Against Penetration Of Insects And Wind Driven Rain.
Please note: This item is a plastic component and therefore is not suitable for use within a) the external walls of buildings more than 11m high where people sleep on the premises (residential, institutional or hospitality) or b) external wall surfaces within 1m of the boundary if the building is 11m high or less, in England. For a compliant alternative see Rytons A1 Fire Rated Metal Rytweep Cavity Weep Vent.
Telecopic Underfloor Vents Facilitate A Flow Of Air From Beneath Suspended Timber Block And Beam Floors Through The Cavity. The Units Are Adjustable Vertically To Extend Through A Number Of Brick Courses.the Front Of The Vent Is Designed To Fit An Easy-trim Brick Vent Or, Where Horizontal Extension Is Required, And Easy-trim Cavity Sleeve Can Be Used. The Rear Of The Vent Features A Grill Panel Designed To Prevent The Entry Of Insects, Rodents Or Debris So As To Avoid Airflow Blockages.
This solid, dense concrete block from Aggregate Industries is suitable for cavity or solid wall constructions, internal load bearing walls and beam and block flooring. Water resistant with sound insulation properties.
The GTV-CS Castellated In-Line Tile Vent is designed for three main purposes: Roof void ventilation; Mechanical extraction; Soil ventilation, all through a castellated roof covering. The in-line profile design of this vent tile makes it almost invisible when installed at either high or low level, with no unsightly hoods or external ducting on show from the exterior to maintain an unbroken appearance to the roofline.
The Easy-trim Peep Vents Functionally Provides Cavity Wall Drainage With An Inconspicous “peep” Profile On The Brick Wall Face. The Design Features Ribbing To Act As A Mortar Key For Secure Flooring, And A Small Angled Exit Hole To Facilitate Water Drainage Whilst Guarding Against Penetration Of Insects And Wind Driven Rain.
Please note: This item is a plastic component and therefore is not suitable for use within a) the external walls of buildings more than 11m high where people sleep on the premises (residential, institutional or hospitality) or b) external wall surfaces within 1m of the boundary if the building is 11m high or less, in England. For a compliant alternative see Rytons A1 Fire Rated Metal Rytweep Cavity Weep Vent.
Telecopic Underfloor Vents Facilitate A Flow Of Air From Beneath Suspended Timber Block And Beam Floors Through The Cavity. The Units Are Adjustable Vertically To Extend Through A Number Of Brick Courses.the Front Of The Vent Is Designed To Fit An Easy-trim Brick Vent Or, Where Horizontal Extension Is Required, And Easy-trim Cavity Sleeve Can Be Used. The Rear Of The Vent Features A Grill Panel Designed To Prevent The Entry Of Insects, Rodents Or Debris So As To Avoid Airflow Blockages.