SCALA2 is a fully integrated water booster pump providing perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time. It packs pump, motor, tank, sensor, drive and non-return valve into one compact unit. And with its intelligent pump control, SCALA2 automatically adjusts performance to both inlet pressure and water consumption in the home. Thanks to a water-cooled motor, SCALA2 even offers one of the lowest noise levels of any booster on the market.
The SOLFEX Underfloor heating manifolds are part pre-assembled and ready for installation with all the necessary components to aid a swift and hassle free installation. The manifold distributes the primary warm heating water from your boiler, heat pump, buffer tank or thermal store evenly into each underfloor heating circuit, if there is a demand for heat within that relevant zone. The SOLFEX Underfloor heating manifolds are manufactured from high grade 304 stainless steel, installation and commissioning couldn't be any simpler, isolation valves are provided on both flow and return and each individual circuit can also be isolated without disruption to the balancing setting, the manifold also incorporates a wall mounting bracket, in-built air bleeding vents and drain off valves.
The SOLFEX single room underfloor heating control pack provides safe temperature controlled mixed water to an underfloor heating system with a heat output up to 3KW, a perfect solution for retro fitting underfloor heating into an additional room or conservatory. Designed to be lightweight and compact in order to connect directly onto pipe work without the need for extra brackets or supports. The Control Pack consists of a temperature mixing valve; an A rated high efficiency Grundfos circulator, isolation valves, flow and return connections and fixing kit. SOLFEX energy systems dedicated Underfloor Heating technical & Sales division can provide detailed specifications according to bespoke design requirements. Single room mixer packs require a dedicated flow and return.
A 2-Port motorised valve supplied with 28mm compression fittings. It is to be used for the flow control of central heating or hot water in 'S plan' central heating systems. The valve operates in conjunction with either a room thermostat or a cylinder thermostat. It will open only when in demand from the thermostat with the actoin of a geared synchronous motor and closes by a spring return mechanism. When the valve is in the open position, a limit switch operates to switch on the heat source. Please note that this valve must be installed according to the direction of the flow as indicated by the arrow on the valve body. It is only suitable for open vented or sealed pumped systems.
The valve comes with a 5 core colour coded flexible cable at a length of 1 metre for ease of installation. Power consumption of the unit at 6W, with a temperature range of 5°C to 88°C and a maxiumum differential pressure of 1 Bar.
Both the actuator heat and synchronous motor are replaceable.
SCALA2 is a fully integrated water booster pump providing perfect water pressure in all taps at all times – even with multiple taps and showers running at the same time. It packs pump, motor, tank, sensor, drive and non-return valve into one compact unit. And with its intelligent pump control, SCALA2 automatically adjusts performance to both inlet pressure and water consumption in the home. Thanks to a water-cooled motor, SCALA2 even offers one of the lowest noise levels of any booster on the market.
The SOLFEX Underfloor heating manifolds are part pre-assembled and ready for installation with all the necessary components to aid a swift and hassle free installation. The manifold distributes the primary warm heating water from your boiler, heat pump, buffer tank or thermal store evenly into each underfloor heating circuit, if there is a demand for heat within that relevant zone. The SOLFEX Underfloor heating manifolds are manufactured from high grade 304 stainless steel, installation and commissioning couldn't be any simpler, isolation valves are provided on both flow and return and each individual circuit can also be isolated without disruption to the balancing setting, the manifold also incorporates a wall mounting bracket, in-built air bleeding vents and drain off valves.
The SOLFEX single room underfloor heating control pack provides safe temperature controlled mixed water to an underfloor heating system with a heat output up to 3KW, a perfect solution for retro fitting underfloor heating into an additional room or conservatory. Designed to be lightweight and compact in order to connect directly onto pipe work without the need for extra brackets or supports. The Control Pack consists of a temperature mixing valve; an A rated high efficiency Grundfos circulator, isolation valves, flow and return connections and fixing kit. SOLFEX energy systems dedicated Underfloor Heating technical & Sales division can provide detailed specifications according to bespoke design requirements. Single room mixer packs require a dedicated flow and return.
A 2-Port motorised valve supplied with 28mm compression fittings. It is to be used for the flow control of central heating or hot water in 'S plan' central heating systems. The valve operates in conjunction with either a room thermostat or a cylinder thermostat. It will open only when in demand from the thermostat with the actoin of a geared synchronous motor and closes by a spring return mechanism. When the valve is in the open position, a limit switch operates to switch on the heat source. Please note that this valve must be installed according to the direction of the flow as indicated by the arrow on the valve body. It is only suitable for open vented or sealed pumped systems.
The valve comes with a 5 core colour coded flexible cable at a length of 1 metre for ease of installation. Power consumption of the unit at 6W, with a temperature range of 5°C to 88°C and a maxiumum differential pressure of 1 Bar.
Both the actuator heat and synchronous motor are replaceable.