Categories
Basket

Manthorpe Terracotta Peep Weep Vent

917311
Check live branch stock

Overview

Provides an unobtrusive solution to cavity wall drainage requirements
  • Features a mortar key to ensure adhesion to the building fabric and an external rib to aid positioning
  • The protective hood is designed to guard against blockage during installation and stops penetration of wind driven rain
  • The exit hole is ample for water drainage but small enough to prevent entry of large insects
  • Replaces a single mortar joint

Technical specification

Depth
115 mm
Width
9 mm
Material
Polypropylene
Colour
Terracotta
Pack Quantity
100
Type
Weep Vent
Manufacturer Model No
G951TR
Brand Name
Manthorpe

Reviews

£1.14
each (Inc. VAT)
Enter your postcode to check availability
Related products
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Brand Name
Celcon
Manufacturer Model No
NRC100100
Made To Order
N
Height
215 mm
Length
440 mm
Width
100 mm
Weight
10 kg
Colour
Grey
Thermal Conductivity
0.19 W/mK
Compressive Strength
7.30 N per mm2
Fire Rating
Class A2
BBA Approved
Yes
Type
Lightweight Block
Show More
£344.16
per pack (Inc. VAT)
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Brand Name
Celcon
Manufacturer Model No
URC100100
Made To Order
N
Height
215 mm
Length
440 mm
Width
100 mm
Weight
5 kg
Colour
Grey
Thermal Conductivity
0.11 W/mK
Compressive Strength
2.90 N per mm2
Fire Rating
Class A3
Pack Quantity
120
BBA Approved
Yes
Type
Lightweight Block
Show More
£220.32
per pack (Inc. VAT)
4.8 (37 reviews)
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
Brand Name
Celcon
Manufacturer Model No
SRC100100
Made To Order
N
Height
215 mm
Length
440 mm
Width
100 mm
Weight
7 kg
Colour
Grey
Thermal Conductivity
0.15 W/mK
Compressive Strength
3.60 N per mm2
Fire Rating
Class A4
BBA Approved
Yes
Type
Lightweight Block
Show More
£1.43
each (Inc. VAT)
The Manthorpe G930 Airbrick has been designed to provide high levels of ventilation into cavity walls and under floor voids. The brick incorporates a front mounted grille with water deflectors
Brand Name
Manthorpe
Range Description
Through Wall and Under Floor Ventilation
Manufacturer Model No
G930BLB
Made To Order
N
Depth
58 mm
Height
72 mm
Width
220 mm
Weight
0.14 kg
Material
Polypropylene
Colour
Blue/Black
Pack Quantity
20
Type
Air Bricks
Show More
£2.94
each (Inc. VAT)
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+H Celcon Hi-7 Aerated Concrete Block 7.3N 100mm
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
Show More
£344.16 per pack (Inc. VAT)
Quick view
H+H Celcon Solar Aerated Concrete Block 2.9N 100mm Pack of 120
H+H Celcon Solar Aerated Concrete Block 2.9N 100mm Pack of 120
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Show More
£220.32 per pack (Inc. VAT)
Quick view
H+H Celcon Standard Aerated Concrete Block Grey 3.6N 440mm x 100mm x 215mm
H+H Celcon Standard Aerated Concrete Block Grey 3.6N 440mm x 100mm x 215mm
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
Show More
£1.43 each (Inc. VAT)
Quick view
Manthorpe Blue/Black Combination Airbrick 9in x 3in
Manthorpe Blue/Black Combination Airbrick 9in x 3in
The Manthorpe G930 Airbrick has been designed to provide high levels of ventilation into cavity walls and under floor voids. The brick incorporates a front mounted grille with water deflectors
Show More
£2.94 each (Inc. VAT)
Quick view