Excellent thermal performance and sound absorption characteristics
Multi-application product which can be used to insulate a wide range of applications
Non-combustible Euroclass A1 Reaction to Fire classification rating
Made with ECOSE® Technology which does not contain any added phenol or formaldehyde. Products made with ECOSE® are soft to touch, they generate low levels of dust and low VOCs
More insulation per roll than alternative Rock Mineral Wool rolls
Combi-cut products are partially perforated rolls providing the flexibility of multiple roll widths to maximise on-site efficiency. The product can be used at widths of:
timber joists at 400mm centres or,
timber joists at 600mm centres or,
unsplit as a full width roll.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.
Brand Name
Ecotherm
Length
1200 mm
Thickness
75 mm
Width
450 mm
Material
Rigid polyisocyanurate PIR foam core with aluminium foil composite to both sides
Usage
New build and upgrading thermal performance of existing cavity walls
Rockwool Ablative Coated Batt is a specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed. This comes in a pack of 1.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.
Rockwool Ablative Coated Batt is a specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed. This comes in a pack of 1.