Hover Over to Zoom In
Overview
- Fast setting-sets in 2 to 3 hours
- Suitable for underfloor heating
- Waterproof
- Suitable for concrete and wooden floors
- Suitable for both exterior and interior use
- Approximate coverage - 1m² per 5kg at 3mm
Technical specification
Brand Name
Evo-Stik
Manufacturer Model No
136915
Interior or Exterior Use
Interior & Exterior
Suitable for
Suitable for concrete and wooden floors
Drying Time
3 hours
Coverage
1 m2 (per 5 kgs)
Colour
Grey
Size
20 kg
Type
Tile Adhesive
Pack Quantity
1
Reviews
3
2 Reviews
Sort reviews:
Sort reviews by:
Reviewed by 2 customers
1
check use by dates on bag
My builder has tried to use and discovered it was out of day and was setting in less than 10 mins and therefore tiles did not stick. Replacement issued but has cost an extra,days work. Check use by dates before using.
5 years ago
Sally
Type of purchase: DIY
No, I would not recommend to a friend
0
0
5
Used before and will use again.
Good quality product, sets really fast too.
6 years ago
Anthony
1
0
Evo-Stik Gripfill Xtra Solvent Based Adhesive 350ml
Strong, instant grip adhesive, with all the qualities of the trusted Gripfill but with XTRA grip. No slippage and no need for pinning. Will bond most building materials and is suitable for interior and exterior use.
£6.98 each (Inc. VAT)
Evo-stik Resin W Mitre Adhesive 50g
Evo-Stik mitre adhesive is a easy to use, 2-part process to instantly bond mitre corners and repairs on wood, MDF, PVCu, plastics and rubber.
£12.31 each (Inc. VAT)
Adesilex P9 971265 White 20kgHIGH Strength Powder Adhesive
Adesilex P9 is a high grab, high strength cement-based powder adhesive ideal for the installation of porous bodied glazed tiles or porcelain tiles on walls. Also suitable for floors where speed of installation is not important.
£24.62 each (Inc. VAT)
Bostik MC250 Vitri-Flex Rapid Set White Wall & Floor Tile Adhesive 20kg
Bostik MC250 Vitri-Flex is a fast-setting, flexible wall and floor tile adhesive in white. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to wall and floors.
This white, rapid-setting wall and floor tile adhesive is formulated for fast track installation and enables tiles to be grouted in approximately 2 to 3 hours after fixing, depending on conditions. It provides excellent grip and adhesion.
Bostik Vitri-Flex tile adhesive is suitable for most interior and exterior installations including more demanding installations, such as use with underfloor heating and areas subject to limited vibration. When fully cured the adhesive is suitable for permanently wet areas such as showers. It will bond to concrete, plaster, sand/cement render and screeds, blockwork, brickwork, glazed surfaces, vinyl tiles, plywood overlay and more.
One of Bostik's best adhesives for vitrified tiles. Available in a 20kg bag.
£24.00 each (Inc. VAT)