Speedfit push-fit fitting for the connection of plastic and copper pipe to a cold water tank.
Designed for tanks with a maximum wall thickness of 4mm. Simply push the fitting fully onto the pipe and hand-tighten the connector to the tank. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works in the loft environment. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe to a cold water tank.
Designed for tanks with a maximum wall thickness of 4mm. Simply push the fitting fully onto the pipe and hand-tighten the connector to the tank. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works in the loft environment. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Tigris K1 patented design has been relentlessly engineered to optimise all the benefits of a composite metal-plastic press-fit system and deliver the optimum solution for sanitary, potable water and heating applications, including re-circulating systems.
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe to a cold water tank.
Designed for tanks with a maximum wall thickness of 4mm. Simply push the fitting fully onto the pipe and hand-tighten the connector to the tank. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works in the loft environment. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe to a cold water tank.
Designed for tanks with a maximum wall thickness of 4mm. Simply push the fitting fully onto the pipe and hand-tighten the connector to the tank. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works in the loft environment. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Tigris K1 patented design has been relentlessly engineered to optimise all the benefits of a composite metal-plastic press-fit system and deliver the optimum solution for sanitary, potable water and heating applications, including re-circulating systems.
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.