Hover Over to Zoom In
Overview
- Requires solder and blowtorch
- For use on hot and cold water systems
- Manufactured to BSEN1254: Part 1
- WRAS approved
- Actual size: 15mm x 1/2in
Technical specification
Suitable for
Gas & Water
Diameter
15 mm
Connection Type
End Feed
Material
Brass-Copper
Years Guaranteed
3
Type
End Feed Tap Connector
Brand Name
Wickes
Made To Order
N
Reviews
Be the first to review this product.
15mm Tap Connector x 3/4inch x 30cm
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£2.34 each (Inc. VAT)
15mm x 300mm Compression x 1/2 Inch Tap Connector
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
£6.13 per pair (Inc. VAT)
Hep2O Hand-TitanTM tap connector white 0.5x15mm
Hep2O is packed with unique features that make fitting easier quicker and more secure for installers. It is the only system with joint recognition and secure demounting and comes with a 50 year guarantee.
£4.38 each (Inc. VAT)
Hep2O straight tap connector with brass nut white 0.75x15mm
Hep2O is packed with unique features that make fitting easier quicker and more secure for installers. It is the only system with joint recognition and secure demounting and comes with a 50 year guarantee.
£5.71 each (Inc. VAT)