Endfeed Partial Crossover 15mm

This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.

This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.

Speedfit Layflat Polybutylene barrier pipe has even greater flexibility making the system very easy to handle and worry free. Flexibility – The pipe is ideal for long runs where a softer pipe material is an advantage so cabling through joists becomes a simple task. Easier to handle – When removed from the coil, the pipe keeps straight and ‘lays flat’ meaning there are no issues with the pipe retaining its memory and trying to coil back into place. barrier Layer – The pipe is made of 5 layers, the center of which is a coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components.

Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used.