Celotex CW4000 PIR Cavity Wall Insulation Board 1200mm x 450mm x 100mm
778071
Watch video
Hover Over to Zoom In
Overview
Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value.
Low emissivity foil facing provides improved thermal performance in sealed cavity air spaces, improving the achievable U-value.
The boards are light and rigid assisting with ease of transportation, handling and fitting. They are sized to fit standard wall tie spacing for ease of installation.
Has been assessed by the BBA as fit for use in defined partial fill cavity wall applications if installed, used and maintained as set out in the certificate. Please
read the certification at insulation-UK.com/BBA for full details and restrictions.
Celotex CW4000 achieves a BRE Green Guide Rating of A, which can assist in demonstrating environmental performance in your BREEAM assessments .
An A1 Non-Combustible Glass Mineral Wool roll, manufactured using Knauf Insulation's unique ECOSE® Technology, and designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level.
Length
4300 mm
Thickness
170 mm
Width
1140 mm
Material
Glass Mineral Wool
Usage
Thermal Loft insulation for a pitched roof at ceiling level only. Standard loft insulation which runs between timber joists and then cross layered on top.
Coverage
4.9 m2
Fire Retardant
Y
Thermal Conductivity
0.044 W/mK
Pack Quantity
1
Certifications Met
Euroclass A1 Reaction to Fire Classification, Eurofins Gold
Celotex XR4000 is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing. Available in thicknesses from 110mm to 200mm, it can be considered for roof, wall and floor applications.
Length
2400 mm
Thickness
150 mm
Width
1200 mm
Material
PIR
Coverage
2.88 m2
Fire Retardant
N
Acoustic
N
Thermal Conductivity
0.022 W/mK
Certifications Met
BBA Certificate Number 16/5352
BBA Certificate Number 17/5405
Full fill cavity wall tongue & groove PIR insulation. Fibre free insulation core with aluminium foil composite to both sides. Engineered jointing system for superior fit. Suitable for full fill cavity wall applications, whilst maintaining a residual 10mm cavity helping resist moisture transfer, aids installation and accommodate mortar squeeze.
2 in 1 insulated dry lining board for fix and dab application. Fibre free rigid polyisocyanurate (PIR) insulation core bonded to 12.5mm tapered edge gypsum plasterboard using proprietary gypsum adhesive. The 2 in 1 board insulates and dry lines walls in one application.
An A1 Non-Combustible Glass Mineral Wool roll, manufactured using Knauf Insulation's unique ECOSE® Technology, and designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level.
Celotex XR4000 is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing. Available in thicknesses from 110mm to 200mm, it can be considered for roof, wall and floor applications.
Full fill cavity wall tongue & groove PIR insulation. Fibre free insulation core with aluminium foil composite to both sides. Engineered jointing system for superior fit. Suitable for full fill cavity wall applications, whilst maintaining a residual 10mm cavity helping resist moisture transfer, aids installation and accommodate mortar squeeze.
2 in 1 insulated dry lining board for fix and dab application. Fibre free rigid polyisocyanurate (PIR) insulation core bonded to 12.5mm tapered edge gypsum plasterboard using proprietary gypsum adhesive. The 2 in 1 board insulates and dry lines walls in one application.