Interior Flush Plywood FD30 Fire Door With 16G Georgian Wired Safety Glass 1981mm x 838mm x 44mm

Supplied unfinished - seal and finish using at least 3 coats but no more than 5 coats of paint

Lipped on two long edges

Glazed with clear wired glass toughened to BS6206 / BS EN 12600 (aperture sizes 120 x 745 mm and 120 x 670 mm)

The top rail of fire doors must not be trimmed - height reduction of up to 5 mm only via bottom edge, and 3 mm on stiles

Fire Doors must be fitted with 3 hinges and positioned as per instructions and must be installed in conjunction with an appropriate Fire Door Frame. Recessed furniture and locks must not be placed within 76mm (3") of any rail/side joint as this will weaken the door

This blank must be fitted with at least 3 hinges and positioned as per instructions and must be installed in conjunction with an appropriate fire door frame

Recessed furniture and locks must not be placed within 76 mm (3") of any rail/side joint as this will weaken the door

Door furniture sold separately