Adesilex P9 is a high grab, high strength cement-based powder adhesive ideal for the installation of porous bodied glazed tiles or porcelain tiles on walls. Also suitable for floors where speed of installation is not important.
Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible grey grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Evo-Stick Instant Grab Wall Tile Adhesive for is a fast-acting, ready-mixed tile adhesive for fixing ceramic wall tiles on dry, internal walls. Its showerproof properties make it a suitable wall tile adhesive for areas subject to some splashing and condensation, such as in kitchens and bathrooms.
The instant tile adhesive is easy-to-use and can be used to tile onto most substrates, including existing tiles.
Suitable materials: For fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders and tile backer boards.
Suitable tiles: Ceramic wall tiles
Available as a 5L instant grab tile adhesive. The adhesive is supplied in a post-consumer recycled (PCR) bucket to reduce the product’s impact on the environment.
Suitable for
Suitable for fixing ceramic wall tiles onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders and tile backer boards.
Interior or Exterior Use
Interior
Application Method
Tiling trowel
Drying Time
24 hours in good conditions
Time to Full Cure
Minimum 24 hours, for non porous surfaces leave for up to 72 hours. Cold conditions will prolong drying times
Evo-Stick Instant Grab Wall Tile Adhesive is a fast-acting, ready-mixed tile adhesive for fixing ceramic wall tiles on dry, internal walls. Its showerproof properties make it a suitable wall tile adhesive for areas subject to some splashing and condensation, such as kitchens and bathrooms.
The instant tile adhesive is easy to use and can be used to tile onto most substrates, including existing tiles.
Suitable materials: For fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders, and tile backer boards.
Suitable tiles: Ceramic wall tiles
Available as a 10L instant grab tile adhesive. The adhesive is supplied in a post-consumer recycled (PCR) bucket to reduce the product's impact on the environment.
Suitable for
Suitable for fixing ceramic wall tiles onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders and tile backer boards.
Interior or Exterior Use
Interior
Application Method
Tiling trowel
Drying Time
24 hours in good conditions
Time to Full Cure
Minimum 24 hours, for non porous surfaces leave for up to 72 hours. Cold conditions will prolong drying times
Adesilex P9 is a high grab, high strength cement-based powder adhesive ideal for the installation of porous bodied glazed tiles or porcelain tiles on walls. Also suitable for floors where speed of installation is not important.
Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible grey grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Evo-Stick Instant Grab Wall Tile Adhesive for is a fast-acting, ready-mixed tile adhesive for fixing ceramic wall tiles on dry, internal walls. Its showerproof properties make it a suitable wall tile adhesive for areas subject to some splashing and condensation, such as in kitchens and bathrooms.
The instant tile adhesive is easy-to-use and can be used to tile onto most substrates, including existing tiles.
Suitable materials: For fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders and tile backer boards.
Suitable tiles: Ceramic wall tiles
Available as a 5L instant grab tile adhesive. The adhesive is supplied in a post-consumer recycled (PCR) bucket to reduce the product’s impact on the environment.
Evo-Stick Instant Grab Wall Tile Adhesive is a fast-acting, ready-mixed tile adhesive for fixing ceramic wall tiles on dry, internal walls. Its showerproof properties make it a suitable wall tile adhesive for areas subject to some splashing and condensation, such as kitchens and bathrooms.
The instant tile adhesive is easy to use and can be used to tile onto most substrates, including existing tiles.
Suitable materials: For fixing onto most internal surfaces including plaster, plasterboard, glazed tiles, brick, cement, cement renders, and tile backer boards.
Suitable tiles: Ceramic wall tiles
Available as a 10L instant grab tile adhesive. The adhesive is supplied in a post-consumer recycled (PCR) bucket to reduce the product's impact on the environment.