Hover Over to Zoom In
Overview
- WRAS approved
- Usage: Suitable for both hot and cold water applications. Not suitable for central heating
- Length: 500mm
- DN13
Technical specification
Maximum Pressure
3.5Mpa
Diameter
22 mm
Length
500 mm
Minimum Diameter
13 mm
Maximum Diameter
17 mm
Thread Size
G3/4
Connection Type
F3/4 and 22mm compression with isolating valve
Material
brass
Colour
natural
Finish
nickle plated
Years Guaranteed
5
Type
G
Made To Order
Y
Manufacturer Model No
JLIV2234-50
Country Origin
China
Brand Name
Primaflow
Range Description
22mm Compression Valve x 3/4inch Tap Connector x 50Cm
Reviews
Be the first to review this product.
CLEARANCE
10mm x 1/2" Hand Titan Tap Connector for Hep2O push-fit plumbing.
Hep2O is not just designed to perform, it’s built to last which is why it comes with a 50 year guarantee (twice as long as anyone else). The slim and sleek push-fit plumbing fittings work with both plastic and copper pipe and are ideal for a range of hot and cold water, and heating applications. Easy to install and with proven performance, Hep2o is the primary solution for central heating systems and hot and cold water services.
£5.76 each (Inc. VAT)
CLEARANCE
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£4.60 each (Inc. VAT)
End Feed Straight Tap Connector 15mm x 19mm
Create your own flow system by using the endfeed range to build a strong and leak free system.
£3.94 each (Inc. VAT)
JG Speedfit bent tap connector 15 x 1/2inch Pack 5
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£33.54 per bag (Inc. VAT)