High quality isolating valve is WRAS approved and leak tested. The valve can be opened and closed using a screwdriver to cut off the water supply so that essential repairs can be carried out.
The Altecnic pressure reducing valve has been designed to provide complete control of inlet pressures up to 12 bar. It covers the use of hot or cold water for domestic and semi commercial applications and is WRAS approved.
High quality lever ball valve with a red handle to indicate hot water supply, COMPRESSION ends manufactured to BS EN 1252-3 and WRAS apoved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
Speedfit push-fit fitting for the connection of plastic and copper pipe. The valve allows isolation of appliances such as a washing machine or dishwasher for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. Should the need arise to demount the connection pull the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Designed, manufactured and assembled in the UK by John Guest Speedfit.
High quality isolating valve is WRAS approved and leak tested. The valve can be opened and closed using a screwdriver to cut off the water supply so that essential repairs can be carried out.
The Altecnic pressure reducing valve has been designed to provide complete control of inlet pressures up to 12 bar. It covers the use of hot or cold water for domestic and semi commercial applications and is WRAS approved.
High quality lever ball valve with a red handle to indicate hot water supply, COMPRESSION ends manufactured to BS EN 1252-3 and WRAS apoved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).
Speedfit push-fit fitting for the connection of plastic and copper pipe. The valve allows isolation of appliances such as a washing machine or dishwasher for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. Should the need arise to demount the connection pull the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Designed, manufactured and assembled in the UK by John Guest Speedfit.