The Bosch 2608P00233 Accessory Set has a variety of drills for wood, masonry and metal in the most popular and often used sizes. Also comes with an Angle Wrench and screwdriver bits in both 25mm and 50mm length. Sold in a robust hard plastic case with clasp.
Greenstar Oilfit range the easy fit fluing solution. Multiple fluing options with the ability to flue internal floor standing boilers from the top, rear or side and external boilers from the rear and side. The Oilfit range is quick to install thanks to its push fit connection and forms a gas tight seal. In most cases, it will also eliminate the need to cut the flue. The Greenstar Oilfit range provide an easy fit installation that requires no special tools when fitting flue extensions, elbows and adaptors.
The Worcester 30i System Boiler is the perfect choice for small properties such as flats and bungalows. Offering compact dimensions, a low lift weight and A-Rated efficiency, the 30i has the potential to save money on annual heating bills and offer reliability through even the coldest months. The 30i System Boiler will require a hot water cylinder in order to deliver hot water to the property. The high efficiency of the 30i boiler can cut heating and hot water bills by 15-20% annually (When replacing an older, G-Rated boiler) and is up to 30% cheaper to run. These savings mean that over the years the boiler will essentially pay for itself, as the quality of Worcester boilers means that you won't need to replace it for many years. Easy to use, the Worcester 30i includes simple boiler controls to ensure your boiler is set at the correct temperature for the customer's need, while also providing operational information and diagnostics to help with maintenance.
The Makita CA5000XJ is a 110V Aluminium Groove Cutter supplied with a 118mm blade giving a max depth of cut of 19mm (11mm using a guide rail). Ideal for processing aluminium composite material. Cuts a v-shaped groove for bending aluminium panel. Can easily be connected to a dust extractor. Supplied in carry case.
Blade Diameter
118 mm
Bore Size
20 mm
Weight
5.10 kg
Maximum Cut at 90 Degrees
19 mm
Maximum Cut in Aluminium
19 mm
Power Type
Corded
No Load Speed
2600 - 6400
Noise K Factor
3
Noise Sound Power
93
Noise Sound Pressure
82
Vibration K Factor
1.5
Wattage
1300 W
Voltage
110 V
Case
Yes
Includes
cutter blade, hex wrench, plate complete, carry case
The Bosch 2608P00233 Accessory Set has a variety of drills for wood, masonry and metal in the most popular and often used sizes. Also comes with an Angle Wrench and screwdriver bits in both 25mm and 50mm length. Sold in a robust hard plastic case with clasp.
Greenstar Oilfit range the easy fit fluing solution. Multiple fluing options with the ability to flue internal floor standing boilers from the top, rear or side and external boilers from the rear and side. The Oilfit range is quick to install thanks to its push fit connection and forms a gas tight seal. In most cases, it will also eliminate the need to cut the flue. The Greenstar Oilfit range provide an easy fit installation that requires no special tools when fitting flue extensions, elbows and adaptors.
The Worcester 30i System Boiler is the perfect choice for small properties such as flats and bungalows. Offering compact dimensions, a low lift weight and A-Rated efficiency, the 30i has the potential to save money on annual heating bills and offer reliability through even the coldest months. The 30i System Boiler will require a hot water cylinder in order to deliver hot water to the property. The high efficiency of the 30i boiler can cut heating and hot water bills by 15-20% annually (When replacing an older, G-Rated boiler) and is up to 30% cheaper to run. These savings mean that over the years the boiler will essentially pay for itself, as the quality of Worcester boilers means that you won't need to replace it for many years. Easy to use, the Worcester 30i includes simple boiler controls to ensure your boiler is set at the correct temperature for the customer's need, while also providing operational information and diagnostics to help with maintenance.
The Makita CA5000XJ is a 110V Aluminium Groove Cutter supplied with a 118mm blade giving a max depth of cut of 19mm (11mm using a guide rail). Ideal for processing aluminium composite material. Cuts a v-shaped groove for bending aluminium panel. Can easily be connected to a dust extractor. Supplied in carry case.