Our range of expansion joint fillers are used to fill expansion gaps in brickwork or concrete, which allow for movement caused by fluctuating temperatures. You can use our range of Fillcrete Fillaboard joint strips, which are bitumen impregnated fiberboard, in concrete expansion joints. And our range of Fillcrete Brickfill expansion joint filler foam rolls are for use in between bricks and blocks. A choice of widths are available to suit your needs.
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
Coursing Units are produced from the same material as all H+H aircrete and are suitable for the same applications as conventional size Celcon Blocks, allowing consistency within the building fabric.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion