Macerators

Thread sealing tape for gas applications. Used in the plumbing & heating industries for sealing pipes, conduits, bolts, valves and threaded gas lines that carry all common gases such as air, oxygen, nitrogen, ammonia, butane, chlorine and hydrogen and Liquids such as Water, Propylene Glycol, Kerosene and Diesel.

Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.

Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.

Speedfit push-fit valve for the connection of plastic and copper pipe. The valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair. Simply push the valve fully onto the pipe and turn the knob on top of the fitting to allow or with strict the flow of water. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Designed, manufactured and assembled in the UK by John Guest Speedfit.