Using a mortar plasticiser will improve the workability of the mixture, while increasing its strength and durability. Plasticisers also minimise cracking and shrinkage in your mortar, as well as increased resistance to frost damage. And, as you’ll need less water in your mortar mix there will be less corrosion to steel. You’ll also find a range of cement dyes and mortar additives such as waterproofing admixture, SBR bonding agent, plaster accelerator and plasterers stabilising primer.
Stronghold glass has excellent stiffness, wet out time and carry time suitable for GRP roofing applications. A very consistent product which is very important for single layer applications… no weak spots. Available in weight 600g/m² or 450g/m² and size 32kg box or cut rolls.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Weather resistant and durable, this mortar is ideal for most brick and block applications and is formulated to provide a general purpose mix of cement, lime and specially graded sand. It contains hydrated lime and plasticiser making it highly workable and cohesive. This motor comes in a convenient weatherproof plastic bag and is suitable for interior and exterior use.
Setcrete™ Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared.
Stronghold glass has excellent stiffness, wet out time and carry time suitable for GRP roofing applications. A very consistent product which is very important for single layer applications… no weak spots. Available in weight 600g/m² or 450g/m² and size 32kg box or cut rolls.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Weather resistant and durable, this mortar is ideal for most brick and block applications and is formulated to provide a general purpose mix of cement, lime and specially graded sand. It contains hydrated lime and plasticiser making it highly workable and cohesive. This motor comes in a convenient weatherproof plastic bag and is suitable for interior and exterior use.
Setcrete™ Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared.