Speedfit push-fit fitting for the connection of plastic and copper pipe. A must for any tool bag! The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means the Stop End provides a leak proof seal and can be removed at any stage in order to allow work to restart or allow an extension to the system. This makes the fitting the perfect tool for when water needs to be turned on, overnight for instance, or if a job suffers an interruption. Stop ends are also useful when pressure testing a system before appliances are connected. Simply push the fitting fully onto the pipe. Should the need arise to demount the connection push the collet toward the body of the fitting and pull the pipe to release. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit fitting for the connection of plastic and copper pipe. A must for any tool bag! The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means the Stop End provides a leak proof seal and can be removed at any stage in order to allow work to restart or allow an extension to the system. This makes the fitting the perfect tool for when water needs to be turned on, overnight for instance, or if a job suffers an interruption. Stop ends are also useful when pressure testing a system before appliances are connected. Simply push the fitting fully onto the pipe. Should the need arise to demount the connection push the collet toward the body of the fitting and pull the pipe to release. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.