Conex Triflow Solder Ring fittings contain lead-free solder complying with EN 29453 and ISO 9453. When heat is applied, the sufficient layer of lead-free solder fills the gap between the tube and fitting by capillary action to form a mechanically strong, leak-proof joint without the need for external solder application.
Range Description
Solder Ring fitting
Manufacturer Model No
TP12S15
Made To Order
N
Brand Name
Conex
Connection Type
Male Copper x copper
Material
Copper
Maximum Pressure
16 bar @ 30°C : 10 bar @ 65°C : 7 bar @ 95°C : 6 bar @ 110°C
Duplex stainless steel unvented cylinder providing mains pressure hot water. The slimline indirect model enables smaller installation areas to be utilised and come complete with a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
The Tectite Classic fitting offers all the performance of metal, with the installation benefits of push-fit. Demountable, slim profile and compatible with most domestic tube materials, it’s the only fitting you need to carry.
Tectite Sprint metal Push-Fit in it’s purest form, only 3 components make up this fitting allowing it to be as slim and attractive as possible. This doesn’t prevent it from providing the exceptional performance you should expect from Tectite.
Conex Triflow Solder Ring fittings contain lead-free solder complying with EN 29453 and ISO 9453. When heat is applied, the sufficient layer of lead-free solder fills the gap between the tube and fitting by capillary action to form a mechanically strong, leak-proof joint without the need for external solder application.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The slimline indirect model enables smaller installation areas to be utilised and come complete with a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
The Tectite Classic fitting offers all the performance of metal, with the installation benefits of push-fit. Demountable, slim profile and compatible with most domestic tube materials, it’s the only fitting you need to carry.
Tectite Sprint metal Push-Fit in it’s purest form, only 3 components make up this fitting allowing it to be as slim and attractive as possible. This doesn’t prevent it from providing the exceptional performance you should expect from Tectite.