Minimum Pitch and Headlap 15° at 100mm headlap 17.5° at 75mm headlap Maximum Pitch 90° (subject to fixing specification)
Maximum Headlap 125mm Minimum Gauge/Batten Spacing 293mm Maximum Gauge/Batten Spacing below 17.5° 318mm 17.5° and over 343mm
Hanging Length (approx.) 397mm Cover (all figures are net and do not allow for wastage) Linear cover of 1 tile 300mm Covering capacity at max gauge 9.7 tiles/m2
Weight (at max. gauge approx.)* 47kg/m2 per pallet, including pallet (approx.) 1.02 tonnes
Battens Required (at max. gauge) 2.92m/m2 Batten Size Rafter centres up to 450mm 38 x 25mm Rafter centres up to 600mm 50 x 25mm
A cloaked verge to suit the classic interlocking concrete tile with a distinctive Roman profile, boasting a gentle roll and subtle pans. It is available in a wide range of colours to blend harmoniously with any environment and is compatible with a wide range of fittings and accessories.
A half tile for use with flat concrete slate which can be laid at pitches as low as 17.5°, for new build or re-roofing applications. Our most economical concrete slate with interlocking edges for simple construction. The MockBond variant has a dummy bond line down its centre line. This creates the impression of two small slates or tiles.
A flat concrete slate which can be laid at pitches as low as 17.5, for new build or re-roofing applications. Our most economical concrete slate with interlocking edges for simple construction. The MockBond variant has a dummy bond line down its centre line. This creates the impression of two small slates or tiles.
Traditionally shaped, this concrete tile provides a striking, bold effect that can be laid as low as 12.5º. Manufactured with a choice of through coloured or granular finishes to easily blend into both historical and modern environments.
A cloaked verge to suit the classic interlocking concrete tile with a distinctive Roman profile, boasting a gentle roll and subtle pans. It is available in a wide range of colours to blend harmoniously with any environment and is compatible with a wide range of fittings and accessories.
A half tile for use with flat concrete slate which can be laid at pitches as low as 17.5°, for new build or re-roofing applications. Our most economical concrete slate with interlocking edges for simple construction. The MockBond variant has a dummy bond line down its centre line. This creates the impression of two small slates or tiles.
A flat concrete slate which can be laid at pitches as low as 17.5, for new build or re-roofing applications. Our most economical concrete slate with interlocking edges for simple construction. The MockBond variant has a dummy bond line down its centre line. This creates the impression of two small slates or tiles.
Traditionally shaped, this concrete tile provides a striking, bold effect that can be laid as low as 12.5º. Manufactured with a choice of through coloured or granular finishes to easily blend into both historical and modern environments.