Rockwool Easyfit Angle support is a special fixing clip that works hand in hand with the clamping plate. This is ideal for fixing to timber, by compressing the barrier against the timber frame. To use this, simply bend the tongues out to a 90 degree angle and impale the barrier into them. The clamping plate is then used to slot the tongue inside and maintain structural torsion and strength. These angle supports comes in a box of 10.
Type 6 cranked cavity wall tie for use in the construction of timber-framed buildings up to 4 storeys in height. Supplied complete with an annular ring shank nail.
Deck-Tite®’s unique ‘thread pitch to Core Size Ratio’ gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength. It’s Tri-Lock™ thread forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good - no stubbed toes!
This Siniatwet area screw from Siniat is designed for use with thin gauge metal stud work. This self-tapping screw is made with carbon steel and comes with a ceramic coating and Phillips head for convenient installation.
Rockwool Easyfit Angle support is a special fixing clip that works hand in hand with the clamping plate. This is ideal for fixing to timber, by compressing the barrier against the timber frame. To use this, simply bend the tongues out to a 90 degree angle and impale the barrier into them. The clamping plate is then used to slot the tongue inside and maintain structural torsion and strength. These angle supports comes in a box of 10.
Type 6 cranked cavity wall tie for use in the construction of timber-framed buildings up to 4 storeys in height. Supplied complete with an annular ring shank nail.
Deck-Tite®’s unique ‘thread pitch to Core Size Ratio’ gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength. It’s Tri-Lock™ thread forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good - no stubbed toes!
This Siniatwet area screw from Siniat is designed for use with thin gauge metal stud work. This self-tapping screw is made with carbon steel and comes with a ceramic coating and Phillips head for convenient installation.