Offers benefits of mains pressure hot water - fast filling baths and powerful showers. It is suitable for use in buildings with multiple bathrooms as there is minimal loss of pressure when more than one tap is open at the same time. They offer high flow rates for powerful showers and fast filling baths. Suitable for use in buildings with multiple bathrooms. Offer fast reheat times and minimal heat loss from the stored water.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The direct model comes complete with two immersions, providing the functionality to heat the store of water by utilising off-peak electricity tariffs. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
A 3kW immersion heater fitted with a dual safety protection thermostat rated at 15 amp. The unit is fully approved and tested to EN60335-2-73. The thermostat is also independently approved by BEAB to EN60730-1.
This best selling range of EnviroFoam Stainless cylinders is a genuine alternative to costly copper cylinders as it is manufactured from high grade stainless steel. The?Gledhill EnviroFoam Indirect Stainless Vented Cylinder?is one of the lightest cylinders on the market, and comes with a 10 year manufacturer warranty. Manufactured to EN12897, meeting the dimensional requirements of BS1566 and 2010 Part L compliant, these cylinders have strong environmental credentials including:
Offers benefits of mains pressure hot water - fast filling baths and powerful showers. It is suitable for use in buildings with multiple bathrooms as there is minimal loss of pressure when more than one tap is open at the same time. They offer high flow rates for powerful showers and fast filling baths. Suitable for use in buildings with multiple bathrooms. Offer fast reheat times and minimal heat loss from the stored water.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The direct model comes complete with two immersions, providing the functionality to heat the store of water by utilising off-peak electricity tariffs. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
A 3kW immersion heater fitted with a dual safety protection thermostat rated at 15 amp. The unit is fully approved and tested to EN60335-2-73. The thermostat is also independently approved by BEAB to EN60730-1.
This best selling range of EnviroFoam Stainless cylinders is a genuine alternative to costly copper cylinders as it is manufactured from high grade stainless steel. The?Gledhill EnviroFoam Indirect Stainless Vented Cylinder?is one of the lightest cylinders on the market, and comes with a 10 year manufacturer warranty. Manufactured to EN12897, meeting the dimensional requirements of BS1566 and 2010 Part L compliant, these cylinders have strong environmental credentials including: