The Heatrae Amptec Electric Flow Boiler is perfect for rural areas, housing projects, multi-floor dwellings, or properties with no mains gas supply. Heatrae Amptec Electric Flow Boilers offer the comfort and convenience of wet central heating and hot water supply, using electricity mains. The boilers can be fitted to provide central heating and hot water in conjunction with an indirect hot water storage cylinder. The water temperature output of the boiler can be controlled with a min/max control adjustment, this provides greater control over hot water, allowing for a more economical boiler, ultimately saving on fuel bills.
Copper vented cylinder providing hot water. The cylinder is available with optional compression fittings and secondary return. Manufactured to order through Gledhill's nationwide manufacturing centres, the product's components such as tapping heights can be bespoke specified to suit any installation, and can be available for next day delivery to site.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The indirect model has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The slimline indirect model enables smaller installation areas to be utilised and come complete with a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
The Heatrae Amptec Electric Flow Boiler is perfect for rural areas, housing projects, multi-floor dwellings, or properties with no mains gas supply. Heatrae Amptec Electric Flow Boilers offer the comfort and convenience of wet central heating and hot water supply, using electricity mains. The boilers can be fitted to provide central heating and hot water in conjunction with an indirect hot water storage cylinder. The water temperature output of the boiler can be controlled with a min/max control adjustment, this provides greater control over hot water, allowing for a more economical boiler, ultimately saving on fuel bills.
Copper vented cylinder providing hot water. The cylinder is available with optional compression fittings and secondary return. Manufactured to order through Gledhill's nationwide manufacturing centres, the product's components such as tapping heights can be bespoke specified to suit any installation, and can be available for next day delivery to site.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The indirect model has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The slimline indirect model enables smaller installation areas to be utilised and come complete with a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.