Copper vented cylinder providing hot water. The cylinder is available with optional compression fittings and secondary return. Manufactured to order through Gledhill's nationwide manufacturing centres, the product's components such as tapping heights can be bespoke specified to suit any installation, and can be available for next day delivery to site.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The indirect model has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
A 3kW immersion heater fitted with a dual safety protection thermostat rated at 15 amp. The unit is fully approved and tested to EN60335-2-73. The thermostat is also independently approved by BEAB to EN60730-1.
The BOSS™ sealed system kit contains all the components an installer would need to connect a BOSS™ central heating expansion vessel to the system. The kit includes a wall mounting bracket, filling loop, safety relief valve with gauge and a cross tee piece.
Copper vented cylinder providing hot water. The cylinder is available with optional compression fittings and secondary return. Manufactured to order through Gledhill's nationwide manufacturing centres, the product's components such as tapping heights can be bespoke specified to suit any installation, and can be available for next day delivery to site.
Duplex stainless steel unvented cylinder providing mains pressure hot water. The indirect model has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water, providing faster recovery times than can be achieved with plain tube coils. The cylinder is manufactured using the very latest automated welding procedures along with full post weld treatments guarantee welds that are as strong as the parent metal. The product is supplied complete with compression fittings, lift up P&T valve, 90 degree elbow on hot water draw off and flexible hose to connect expansion vessel.
A 3kW immersion heater fitted with a dual safety protection thermostat rated at 15 amp. The unit is fully approved and tested to EN60335-2-73. The thermostat is also independently approved by BEAB to EN60730-1.
The BOSS™ sealed system kit contains all the components an installer would need to connect a BOSS™ central heating expansion vessel to the system. The kit includes a wall mounting bracket, filling loop, safety relief valve with gauge and a cross tee piece.