Hover Over to Zoom In
Overview
- Comes with a 50-year manufacturer's guarantee
- Kitemarked to Class S of BS EN 7291, parts 1 and 2 and is manufactured within a quality management system which satisfies BS EN ISO 9002
- WRAS approved
- Leak-free connection guaranteed
- In4Sure joint recognition for a secure joint every time
- No tools needed
- Secure demounting with the HepKey system
- For intermittent hot and cold water use up to a maximum of 65 degree C
- New and improved smartsleeve stays captive in the pipe
Technical specification
Made To Order
N
Manufacturer Model No
HD225H/15W
Range Description
Flexible Connectors
Brand Name
Hep2O
Diameter
15 mm
Length
500 mm
Connection Type
Push-fit x Push-fit
Material
PB
Maximum Pressure
18 bar
Colour
Stainless Steel
Finish
Streamlined
Years Guaranteed
50
Type
Tap Connectors
Pack Quantity
2
Reviews
Be the first to review this product.
CLEARANCE
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£102.97 each (Inc. VAT)
CLEARANCE
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£4.60 each (Inc. VAT)
15mm Tap Connector x 3/4inch x 30cm
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£2.34 each (Inc. VAT)
15mm x 300mm Compression x 1/2 Inch Tap Connector
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.
£6.13 per pair (Inc. VAT)