More economical than using cement based slates or tiles based on the amount of effort required to install
More economical than using cement based slates or tiles based on the amount of effort required to install
Self adhesive tabs for ease of installation in summer, in colder conditions the bond will take longer therefore blobs of lap mastic should be applied on each corner
Use 20mm large head galvanised clout nails as reinforcement, this is recommended for steep sloped roofs and when laying in colder conditions
Bought to cover shed roof. Pleased with colour and looks to be good quality. Very heavy to handle and best to have two people to lift it to avoid risk of tearing it.
Roofing Shingles are lightweight, glass fibre based bitumen strip slates. They are easily installed and give the appearance of a highly decorative tiled roof finish. Roofing Shingles can be used on a wide variety of buildings, temporary or permanent, and have proved immensely popular with both professional and DIY Installers alike.
The Modern interlocking tile is a flat, smooth, single-lap interlocking design whose slate-like appearance is enhanced by a broken bond laying pattern.
Profile 3 is easy to handle and is suitable for small structures in the agricultural, industrial and domestic sectors, such as garages, general purpose sheds and smaller buildings.
A half tile for use with flat concrete slate which can be laid at pitches as low as 17.5°, for new build or re-roofing applications. Our most economical concrete slate with interlocking edges for simple construction. The MockBond variant has a dummy bond line down its centre line. This creates the impression of two small slates or tiles.
Roofing Shingles are lightweight, glass fibre based bitumen strip slates. They are easily installed and give the appearance of a highly decorative tiled roof finish. Roofing Shingles can be used on a wide variety of buildings, temporary or permanent, and have proved immensely popular with both professional and DIY Installers alike.
The Modern interlocking tile is a flat, smooth, single-lap interlocking design whose slate-like appearance is enhanced by a broken bond laying pattern.
Profile 3 is easy to handle and is suitable for small structures in the agricultural, industrial and domestic sectors, such as garages, general purpose sheds and smaller buildings.
A half tile for use with flat concrete slate which can be laid at pitches as low as 17.5°, for new build or re-roofing applications. Our most economical concrete slate with interlocking edges for simple construction. The MockBond variant has a dummy bond line down its centre line. This creates the impression of two small slates or tiles.