Proguard debris containment netting is manufactured from a knitted fabric which has an open mesh construction to reduce wind loading on scaffold structures. The netting is manufactured from heavy duty 70gsm material and is designed to be fixed to the outside of the scaffolding framework for the safety of employees, pedestrians, buildings and traffic around the perimeter of the construction site. It is secured by using cable ties, achieving a fixing pattern of approximately one cable tie per metre in each direction.
Widely used throughout the house building industry to protect most surfaces, Proguard Card offers hard wearing, heavy-duty temporary protection. Simply roll out, trim where necessary and tape all joints. Proguard Card offers cost effective floor protection from heavy foot traffic during construction and building work. Simply roll out, trim where necessary and tape all joints.�
With Proguard Flame Retardant Fleece Protection, floors are protected from liquid damage and other hazards. The flame retardant properties of this product make it ideal for applications that require strict fire-resistant compliance in accordance with BFL s1 / DIN EN 13501-1 e IMO res.MSC.307.88. It can also be used in the international maritime industry during boat and yacht fit out as it benefits from wheel-mark certification. It has a self-adhesive film on the underneath and anti-slipping fleece on the top face. It stays securely in place, does not require tape or additional fixing and leaves absolutely no residue on removal. The fleece is manufactured from 1.5mm thick, hard wearing non-woven synthetic fibres which provides excellent shock absorption. The underside is 100% waterproof to hold spills and protects against wet foot traffic.
Flame retardant Correx� protection rolls are manufactured from strong corrugated polypropylene to provide long lasting protection for windows, doors, stairs, walls and floors. Lightweight and extremely strong, the plastic sheets are tear, puncture and impact resistant. They can be cut, curved and creased to fit any surface offering complete surface protection for a variety of applications during refurbishment, building and construction projects. Supplied on a 50m x 1m roll for easy transportation and handling.
Fire resistant�protection rolls are similar to twin wall plastic sheeting, Antinox�and correx board and are ideal for the same uses � i.e. protection for floors and other surfaces.
Proguard debris containment netting is manufactured from a knitted fabric which has an open mesh construction to reduce wind loading on scaffold structures. The netting is manufactured from heavy duty 70gsm material and is designed to be fixed to the outside of the scaffolding framework for the safety of employees, pedestrians, buildings and traffic around the perimeter of the construction site. It is secured by using cable ties, achieving a fixing pattern of approximately one cable tie per metre in each direction.
Widely used throughout the house building industry to protect most surfaces, Proguard Card offers hard wearing, heavy-duty temporary protection. Simply roll out, trim where necessary and tape all joints. Proguard Card offers cost effective floor protection from heavy foot traffic during construction and building work. Simply roll out, trim where necessary and tape all joints.�
With Proguard Flame Retardant Fleece Protection, floors are protected from liquid damage and other hazards. The flame retardant properties of this product make it ideal for applications that require strict fire-resistant compliance in accordance with BFL s1 / DIN EN 13501-1 e IMO res.MSC.307.88. It can also be used in the international maritime industry during boat and yacht fit out as it benefits from wheel-mark certification. It has a self-adhesive film on the underneath and anti-slipping fleece on the top face. It stays securely in place, does not require tape or additional fixing and leaves absolutely no residue on removal. The fleece is manufactured from 1.5mm thick, hard wearing non-woven synthetic fibres which provides excellent shock absorption. The underside is 100% waterproof to hold spills and protects against wet foot traffic.
Flame retardant Correx� protection rolls are manufactured from strong corrugated polypropylene to provide long lasting protection for windows, doors, stairs, walls and floors. Lightweight and extremely strong, the plastic sheets are tear, puncture and impact resistant. They can be cut, curved and creased to fit any surface offering complete surface protection for a variety of applications during refurbishment, building and construction projects. Supplied on a 50m x 1m roll for easy transportation and handling.
Fire resistant�protection rolls are similar to twin wall plastic sheeting, Antinox�and correx board and are ideal for the same uses � i.e. protection for floors and other surfaces.