Happy to try frog tape for our fine painting work, however I did have some leakage from the tape. One of the three lines that were taped was flawless. The other two had some minimal leakage under the tape line. This was despite trying to push the tape down as best possible. Easy to pull off the roll and the applie ...
Proguard trap mats are tacky plastic sheets that provide cost-effective containment of dust and dirt during fit out and refurbishment work. These heavy duty tack mats will remove dirt and debris from foot and wheeled traffic in industrial settings.
Each tacky mat contains 36 peel-away cotton layers which enable removal of heavier dirt and debris. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Proguard Flame Retardant (EN 13501-1) Protectall Fleece is arguably the most versatile temporary protection product. It provides excellent impact protection and is suitable for hard floors, walls, windows, ceilings, metal - virtually any surface! This premium fleece has a self-adhesive film on the underneath and an anti-slipping, flame retardant fleece on the top face. It stays securely in place, does not require tape or additional fixing and leaves absolutely no residue on removal.
Our Proguard Checker Plate PVC Runner Matting is a high quality, high profiled matting with excellent resistance to oil, grease and chemicals. Diamond embossed patterned and flexible, the yellow mat is made with PVC which makes it odourless and easier to move than heavy rubber.
An ideal material for loose lay, long length safe walkways and work areas.
With Proguard Flame Retardant Fleece Protection, floors are protected from liquid damage and other hazards. The flame retardant properties of this product make it ideal for applications that require strict fire-resistant compliance in accordance with BFL s1 / DIN EN 13501-1 e IMO res.MSC.307.88. It can also be used in the international maritime industry during boat and yacht fit out as it benefits from wheel-mark certification. It has a self-adhesive film on the underneath and anti-slipping fleece on the top face. It stays securely in place, does not require tape or additional fixing and leaves absolutely no residue on removal. The fleece is manufactured from 1.5mm thick, hard wearing non-woven synthetic fibres which provides excellent shock absorption. The underside is 100% waterproof to hold spills and protects against wet foot traffic.
Proguard trap mats are tacky plastic sheets that provide cost-effective containment of dust and dirt during fit out and refurbishment work. These heavy duty tack mats will remove dirt and debris from foot and wheeled traffic in industrial settings.
Each tacky mat contains 36 peel-away cotton layers which enable removal of heavier dirt and debris. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Proguard Flame Retardant (EN 13501-1) Protectall Fleece is arguably the most versatile temporary protection product. It provides excellent impact protection and is suitable for hard floors, walls, windows, ceilings, metal - virtually any surface! This premium fleece has a self-adhesive film on the underneath and an anti-slipping, flame retardant fleece on the top face. It stays securely in place, does not require tape or additional fixing and leaves absolutely no residue on removal.
Our Proguard Checker Plate PVC Runner Matting is a high quality, high profiled matting with excellent resistance to oil, grease and chemicals. Diamond embossed patterned and flexible, the yellow mat is made with PVC which makes it odourless and easier to move than heavy rubber.
An ideal material for loose lay, long length safe walkways and work areas.
With Proguard Flame Retardant Fleece Protection, floors are protected from liquid damage and other hazards. The flame retardant properties of this product make it ideal for applications that require strict fire-resistant compliance in accordance with BFL s1 / DIN EN 13501-1 e IMO res.MSC.307.88. It can also be used in the international maritime industry during boat and yacht fit out as it benefits from wheel-mark certification. It has a self-adhesive film on the underneath and anti-slipping fleece on the top face. It stays securely in place, does not require tape or additional fixing and leaves absolutely no residue on removal. The fleece is manufactured from 1.5mm thick, hard wearing non-woven synthetic fibres which provides excellent shock absorption. The underside is 100% waterproof to hold spills and protects against wet foot traffic.