Speedfit push-fit hose connector. Not suitable for central heating systems, hot and cold water only. No tools required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used
This suction and delivery hose is constructed from a rigid, yet flexible, nylon material with an embedded spiral helix for reinforced construction and shock resistance. It is commonly used for the suction of various liquids and abrasive materials. These hoses can be used both on the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pump.
Speedfit push-fit flexi hose for the connection of plastic and copper pipe. This hose is ideal for the connection of two pipes where the angle is too steep to bend pipe to make a connection. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
Speedfit push-fit hose connector. Not suitable for central heating systems, hot and cold water only. No tools required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit lengths of barrier pipe are rigid making them easy to handle on site. Manufactured in the UK by John Guest Speedfit. The pipe is ideal for short runs where a harder pipe material is an advantage. The pipe is made of 5 layers, the center of which is a blue coloured oxygen barrier which prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, Speedfit Pipe is cooler and therefore safer to touch. Note: JG Speedfit pipe inserts must be used
This suction and delivery hose is constructed from a rigid, yet flexible, nylon material with an embedded spiral helix for reinforced construction and shock resistance. It is commonly used for the suction of various liquids and abrasive materials. These hoses can be used both on the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pump.
Speedfit push-fit flexi hose for the connection of plastic and copper pipe. This hose is ideal for the connection of two pipes where the angle is too steep to bend pipe to make a connection. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.