Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications. The flexible piping system provides the ability to significantly reduce installation time without the need for specialist tools. The fittings can be demounted if required, are lead free, and remove the risk of any scale build up. Extensive tests have shown that Speedfit products will withstand temperatures and pressures well in excess of normal working conditions. JG Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' which inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. The white and grey collet clips can be used to prevent accidental release of pipe when using standard Speedfit connections. The red and blue variety, are simply for colour coding. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
In the past builders would set their pipes into concrete floors – and a burst pipe could lead to hours of laborious work. Nowadays, Manthorpe’s underfloor ducting system means that for routine repair and maintenance you need little more than a screwdriver and a spare half hour.
In the past builders would set their pipes into concrete floors – and a burst pipe could lead to hours of laborious work. Nowadays, Manthorpe’s underfloor ducting system means that for routine repair and maintenance you need little more than a screwdriver and a spare half hour.
Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications. The flexible piping system provides the ability to significantly reduce installation time without the need for specialist tools. The fittings can be demounted if required, are lead free, and remove the risk of any scale build up. Extensive tests have shown that Speedfit products will withstand temperatures and pressures well in excess of normal working conditions. JG Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' which inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. The white and grey collet clips can be used to prevent accidental release of pipe when using standard Speedfit connections. The red and blue variety, are simply for colour coding. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
In the past builders would set their pipes into concrete floors – and a burst pipe could lead to hours of laborious work. Nowadays, Manthorpe’s underfloor ducting system means that for routine repair and maintenance you need little more than a screwdriver and a spare half hour.
In the past builders would set their pipes into concrete floors – and a burst pipe could lead to hours of laborious work. Nowadays, Manthorpe’s underfloor ducting system means that for routine repair and maintenance you need little more than a screwdriver and a spare half hour.