JG Speedfit valve flexible hose 15mm x 1/2inch bsp 300mm
Hover Over to Zoom In
Overview
- Push-fit and demountable connections
- Hot and cold water only, 1 Bar at 85 °C, 12.5 Bar at 2°C
- Not suitable for central heating system
- Isolate by turning the screw a 1/4 turn
- WRAS approved
- Designed, manufactured and assembled in the UK by John Guest
Technical specification
Made To Order
N
Brand Name
John Guest
Manufacturer Model No
FLX24P
Range Description
Flexible Connectors
Diameter
15 mm
Length
300 mm
Thread Size
1/2"
Connection Type
Push-fit x BSP
Material
Braided Hose
Colour
Silver
Finish
Braided
Years Guaranteed
25
Type
Flexible Hoses
Reviews
Be the first to review this product.
CLEARANCE
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£4.60 each (Inc. VAT)
15mm x 300mm Compression XM12 Mono Tails
This hose is ideal for the connection of taps. To isolate the appliance simply turn the handle on the valve a 1/4 turn. To make a connection simply push the fitting fully on to the pipe and screw the nut onto the thread of the appliance.
£6.84 per pair (Inc. VAT)
Hep2O HD125G/15W Flexible Tap Connector Monobloc Mixers 300mm x 15mm x M12
Push-fit braided flexible tap connector with Monobloc Mixers for easy jointing.
£30.44 each (Inc. VAT)
JG Speedfit flexible hose 15 x 15mm - 300mm
Speedfit push-fit flexi hose for the connection of plastic and copper pipe. This hose is ideal for the connection of two pipes where the angle is too steep to bend pipe to make a connection. Simply push the fitting fully on to the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£9.72 each (Inc. VAT)