I might use this product again ,or maybe Celotex instead
I used it in insulating our Garden log cabin, along with a breathable foil backed insukation membrane finsshed with an outer plywood skin.
I find it easy to use and reasonably priced. How well it performs we shall find out this winter. I might in future prefer to use a sheet material like Celotex , which although a little more expensive ,seems to be a better all round product.
1 year ago
Alan from Aberdeen
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Yes I would buy this product again
Was used as part of the exterior insulation of our wooden cabin. As part of a sandwich of tinfoil, air gap, polystyrene and outer thin plywood layer.
1 year ago
customer
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Vey good product
Bought this to insulate a new photographic studio and I found vey good and easy to install. The only down side is that it a bit messy to cut with small particles of polystyrene cling to the tools.
Recticel Eurowall® + is a premium, high performance full fill insulation board with precision cut tongue and groove joints on all four sides. This ensures that the boards lock tightly together minimising heat loss through thermal bridging. This unique joint offers increased protection against wind driven rain as well as improved windtightness.
Recticel Eurothane® Eurodeck is a thermal insulation board for use in warm flat roofs under mechanically fixed single-ply membrane waterproofing systems. Eurothane® Eurodeck is compatible with mechanically fixed single-ply systems, benefiting from high compressive strength and excellent dimensional stability that ensures the flat surface finish required for optimum performance in new build and refurbishment projects. It is faced on both sides with a multi-layer coated aluminum foil.
Recticel Plylok® is a thermal insulation board for use in warm flat roofs under traditional bituminous waterproofing and single-ply waterproofing membranes. Plylok® consists of an insulation board bonded to a 6mm plywood top layer. It boasts high compressive strength and dimensional stability meaning it’s the ideal choice for contractors and installers for both new build and refurbishment projects.
Length
2400 mm
Thickness
96 mm
Width
1200 mm
Material
PIR
Usage
Warm flat roofs under built-up felt and single-ply waterproofing systems.
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.
Manufacturer Model No
CAV50
Brand Name
Ecotherm
Length
1200 mm
Thickness
50 mm
Width
450 mm
Material
Rigid polyisocyanurate PIR foam core with aluminium foil composite to both sides
Usage
New build and upgrading thermal performance of existing cavity walls
Recticel Eurowall® + is a premium, high performance full fill insulation board with precision cut tongue and groove joints on all four sides. This ensures that the boards lock tightly together minimising heat loss through thermal bridging. This unique joint offers increased protection against wind driven rain as well as improved windtightness.
Recticel Eurothane® Eurodeck is a thermal insulation board for use in warm flat roofs under mechanically fixed single-ply membrane waterproofing systems. Eurothane® Eurodeck is compatible with mechanically fixed single-ply systems, benefiting from high compressive strength and excellent dimensional stability that ensures the flat surface finish required for optimum performance in new build and refurbishment projects. It is faced on both sides with a multi-layer coated aluminum foil.
Recticel Plylok® is a thermal insulation board for use in warm flat roofs under traditional bituminous waterproofing and single-ply waterproofing membranes. Plylok® consists of an insulation board bonded to a 6mm plywood top layer. It boasts high compressive strength and dimensional stability meaning it’s the ideal choice for contractors and installers for both new build and refurbishment projects.
Partial fill cavity wall PIR insulation. Fibre free rigid insulation core with aluminium foil composite to both sides. The boards are conveniently sized to co-ordinate with brick and block dimensions and allow the insertion of wall ties at the appropriate spacing.