Sopratherm GA4000 has been assessed by the BBA as fit for use in defined roof, wall and floor applications if installed, used and maintained as set out in the certificate. Please read the certification at insulation-UK.com/
BBA for full details and restrictions.
To ensure we are providing you with the most up to date information available please visit our Manufacturer Technical Information page
Technical specification
Range Description
Insulation Board
Brand Name
Celotex
Manufacturer Model No
GA4050
Made To Order
N
Length
2400 mm
Thickness
50 mm
Width
1200 mm
Material
PIR
Coverage
2.88 m2
Thermal Conductivity
0.022 W/mK
Certifications Met
BBA Certificate Number 16/5352
BBA Certificate Number 17/5405
Warm Roof construction is a particularly effective way of insulating complex
roofs. Insulating above - or above and between - the roof timbers ensures
that the structure is kept at or near the internal environmental conditions,
reducing thermal stress and condensation risk.
Recticel Eurowall+ Cavity Insulation Board measures 1.2m in length, 45cm in width, and has a thickness of 9cm, providing a total coverage area of 0.54 m2.
Recticel Eurowall + is a premium, high-performance full-fill insulation board with precision-cut tongue and groove joints on all four sides. This ensures that the boards lock tightly together, minimising heat loss through thermal bridging. This unique joint offers increased protection against wind-driven rain as well as improved windtightness.
Recticel Powerdeck U 1.2 m in length, 60 cm in width, and 5 cm thick providing a total coverage area of 0.72 m2 is a high performance and easy to install flat roof insulation board suitable for torch-on felt. Powerdeck U is a high performance rigid PIR insulation board for use in warm flat roofs with bituminous torch-on felt waterproofing systems. Its optimum stability, strength and structural integrity allows for the flattest finish. Combined with its precision-cut dimensions, your installation is quicker, easier and more cost effective.
Country Origin
United Kingdom
Made To Order
N
Brand Name
Recticel
Length
1200 mm
Thickness
50 mm
Width
600 mm
Material
PIR
Usage
Warm flat roofs with any hot applied waterproofing system (including torch-on) and any bitumen compatible single-ply membrane system.
Celotex Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity. Another significant benefit of Thermaclass Cavity Wall 21 is that it does not require board joints to be taped, saving both time and additional cost to the installer. The tongue and groove edge profile helps to keep the boards in line and acts as the barrier to water ingress by preventing water from tracking between the board joints.
Warm Roof construction is a particularly effective way of insulating complex
roofs. Insulating above - or above and between - the roof timbers ensures
that the structure is kept at or near the internal environmental conditions,
reducing thermal stress and condensation risk.
Recticel Eurowall+ Cavity Insulation Board measures 1.2m in length, 45cm in width, and has a thickness of 9cm, providing a total coverage area of 0.54 m2.
Recticel Eurowall + is a premium, high-performance full-fill insulation board with precision-cut tongue and groove joints on all four sides. This ensures that the boards lock tightly together, minimising heat loss through thermal bridging. This unique joint offers increased protection against wind-driven rain as well as improved windtightness.
Recticel Powerdeck U 1.2 m in length, 60 cm in width, and 5 cm thick providing a total coverage area of 0.72 m2 is a high performance and easy to install flat roof insulation board suitable for torch-on felt. Powerdeck U is a high performance rigid PIR insulation board for use in warm flat roofs with bituminous torch-on felt waterproofing systems. Its optimum stability, strength and structural integrity allows for the flattest finish. Combined with its precision-cut dimensions, your installation is quicker, easier and more cost effective.
Celotex Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity. Another significant benefit of Thermaclass Cavity Wall 21 is that it does not require board joints to be taped, saving both time and additional cost to the installer. The tongue and groove edge profile helps to keep the boards in line and acts as the barrier to water ingress by preventing water from tracking between the board joints.