Evolution 230V 210mm MULTI-MATERIAL Saw HTCR210SMS
4.7
97 Reviews
Hover Over to Zoom In
Overview
- The saw features laser-guidance for accuracy and is supplied with a premium TCT blade for smooth cuts.
- It allows fast and easy blade change
- is supplied with a dust collection bag and adaptor for use with vacuum extraction to keep the work surface clean and safer for working.
- For additional accuracy and faster adjustments, the R210SMS+ has dual quick-release clamps.
- For easy transporting around the workplace, it features integrated carry handles.
Technical specification
Blade Diameter
210mm
Bore Size
25.4mm
Weight
14 kg
Maximum Cut at 90 Degrees
230x65mm
Maximum Cut in Steel
6mm
Maximum Bevel
45 °
Power Type
Corded
Wattage
1500 W
Voltage
230 V
Case
No
Type
multi material saw
Years Guaranteed
2
Manufacturer Model No
HTCR210SMS
Country Origin
China
Brand Name
Evolution
Reviews
4.7
97 Reviews
Most liked positive review
I foolishly wrecked my...
I foolishly wrecked my old mitre saw by trying to cut an oversize piece of wood but it turned out to be a bit of luck in the end as I replaced it with an Evolution. The Evolution is so much better in every respect - the quality of build, its heavier, more powerful and makes wider and more accurate cuts. The most i ...
View more
Most liked negative review
The rear fence has a...
The rear fence has a slight bow and is therefore not flat. I have tried the set the saw blade square to the rear fence using an engineers square, after completing this I tried a test cut on a 120mm wide board. The cut was out of square on this setting.
I then tried to adjust the rear fence until I did achieve a s ...
View more
Sort reviews:
Sort reviews by:
Reviewed by 0 customers
5
A very well built and...
A very well built and packaged product with simple to follow instructions a great mitre saw with plenty power.
1 year ago
Peter S
No, I would not recommend to a friend
0
0
5
Great saw
Bought the 210+ with stand and it's perfect. You can buy cheaper but you will not find better quality at this price.
2 years ago
Robert S
No, I would not recommend to a friend
0
0
5
Bery impressed with...
Bery impressed with this item. As a novice to woodwork it is amazingly simple to use and leaves a great finish. Highly recommended
2 years ago
Clinton B
No, I would not recommend to a friend
0
0
5
Very good so far....
Very good so far. Solid feel, clean cut when using the fine wood blade. I tested the mitre angle with a digital inclinometer and it was spot on. Instructions were slightly confusing: telling me to identify right hand and left hand parts which were in fact absolutely identical.
2 years ago
Allan W
No, I would not recommend to a friend
0
0
5
What a great saw
Can not wait until I have built a bench so that I can use the new saw, if it is as good as my existing Evolution saw I will be well pleased,
Have not taken it out of the box yet
2 years ago
John B
No, I would not recommend to a friend
0
0
1
Just want the...
Just want the carpenter (husband) needed for the jobs we will be undertaking.
2 years ago
Lavinia B
No, I would not recommend to a friend
0
0
5
First class product....
First class product.
Should have bought one years ago instead of doing it the hard way.
5 star.
3 years ago
Sam M
No, I would not recommend to a friend
0
0
5
I really like this saw...
I really like this saw,it doesn't cut as wide a crosscut as I would like,but
it cuts very cleanly,and I like the laser assistance it gives.I would suggest that you attach it to a vacuum cleaner,because the sawdust
seems to go everywhere but into the little dust bag.But this is niggling,I
love my saw
3 years ago
Mo C
No, I would not recommend to a friend
0
0
4
Evolution R210SMS+ 210mm Sliding Compound Mitre Saw
I bought this saw for fitting joinery - skirtings, architraves, floor boards etc, and for occasional use cutting metal angles and hollow sections. Out of the box it needed a little fine tuning to the setting up, but now it cuts beautifully accurate mitres, angles and square cuts on timber.
I have yet to try the blade on metal sections or nails in timber.
The vertical clamp works quite well, but it gets in the way when the saw is tilted to the left, unless you clamp the 'waste' instead of the workpiece, which does not work well.
If the clamp had a good deal less height that would be a great improvement.
The horizontal clamp unfortunately droops on tightening and tend to lift the workpiece off the table a fraction so cuts are inaccurate.
The dust bag stops the dust flying around the room, but most of it falls out onto and around the saw. I have not tried attaching a vacuum cleaner yet.
All in all the saw is excellent value for money, and could be considerably enhanced by improvement of the accessories.
3 years ago
Owen E
No, I would not recommend to a friend
0
0
5
This is a very good...
This is a very good saw. It is used by a group of young adult learners with learning disabilities. They find it easy to set up and use. the laser line is very useful and assist the learners with setting up accurately. the blade gives a very clean cut.
3 years ago
Huw P
No, I would not recommend to a friend
0
0
DeWalt 110V 305mm Mitre Saw DWS780-LX
The DeWalt 110V 2305mm Mitre Saw has been constructed with a heavy duty motor that delivers powerful cutting for all types of materials. The XPS Shadow line cut indicator offers fast and accurate alignment of the blade while illuminating the work piece for increased productivity, with no adjustment required.
£912.79 each (Inc. VAT)
DeWalt XPS 110V Corded 216mm 1400W Slide Mitre Saw DWS774-LX
The DeWalt DWS774-GB Slide Mitre Saw with XPS features a powerful 1400 watt motor providing up to 6300 blade rpm. Also with the new XPS™ cross cut alignment system featuring an ultra-bright LED light. It casts a laser-like shadow on the work surface, showing the user precisely where the blade will come in contact with the material. This unique alignment system requires no recalibration over time or after changing blades.
£275.26 each (Inc. VAT)
Hikoki 1050W 216mm Slide Compound Mitre Saw C8FSEJSZ 110V
C8FSE 216mm slide compound mitre saw has the rugged power for the toughest cutting jobs.
The C8FSE slide compound mitre saw boasts a powerful 1050 watt motor with 5500rpm blade speed, the 216mm diameter blade delivers an impressive 65mm max depth of cut, innovative twin horizontal rails give an equally impressive 312mm crosscut capacity, whilst a linear ball bearing slide system improves cutting accuracy and control, providing maximum support for large material cuts at any angle.
Positive stops on the mitre and bevel scales allow adjustment & quick set-up of the cutting depth for grooving and rebating applications, allowing accurate and simple setting of bevel angles up to 48 degree both to the left and angles between 0-45 degree left & 0-45 degree right providing maximum versatility.
The C8FSE also features electronic speed control maintaining a consistant rpm whilst cutting, electric brake halting rotation of the blade within seconds preventing unintended cuts, splinter guard for reducing tear out for increased safety and an adjustable pivoting fence for improved stability.
The lightweight, portable 14kg design of the C8FSE makes transportation to and around the worksite easy without compromising on operating power and efficiency. The vibration reducing, comfortable, ergonomic vertical soft grip handle provides maximum comfort and reduces user fatigue.
£258.00 each (Inc. VAT)