Grade A resin is suitable for a variety of applications such as roofing, timber sheathing and boat building.
This resin is supplied pre accelerated and is activated with the addition of MEKP catalyst at 1% to 4% by volume. Pot life at 20degC. using 2% catalyst is approximately 20 minutes. More catalyst decreases working time
Cures with a slight translucent tint
Filler powders, metal powders and colour pigment pastes can be added
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Size
20kg
Interior or Exterior Use
Interior
Coverage per Litre
A 20kg bag of powder will cover 3.5 - 5 m2, applied in two coats at 1 - 2 mm thickness each.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Brand Name
Setcrete
Manufacturer Model No
T0600K2A
Colour
Green
Size
2.50 L
Drying Time
20-60 min
Suitable for
used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard
Stronghold glass has excellent stiffness, wet out time and carry time suitable for GRP roofing applications. A very consistent product which is very important for single layer applications… no weak spots. Available in weight 600g/m² or 450g/m² and size 32kg box or cut rolls.
The Setcrete 2K Pro Liquid (5L) is the dedicated gauging liquid designed specifically for use with Setcrete 2K Pro Powder. Together, they form a high-performance, two-part water-mix replacement system that excels in demanding refurbishment environments where speed and adhesion are critical.
Note: This product is the liquid component only. For a complete levelling solution, ensure you have the Setcrete 2K Pro 20kg Powder to hand.
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue.
Stronghold glass has excellent stiffness, wet out time and carry time suitable for GRP roofing applications. A very consistent product which is very important for single layer applications… no weak spots. Available in weight 600g/m² or 450g/m² and size 32kg box or cut rolls.
The Setcrete 2K Pro Liquid (5L) is the dedicated gauging liquid designed specifically for use with Setcrete 2K Pro Powder. Together, they form a high-performance, two-part water-mix replacement system that excels in demanding refurbishment environments where speed and adhesion are critical.
Note: This product is the liquid component only. For a complete levelling solution, ensure you have the Setcrete 2K Pro 20kg Powder to hand.