Top coat has thixotropic properties and will resist draining away even on inclined surfaces
Suitable for a variety of applications such as roofing and garden ponds
Manufactured to colour RAL7045. If using more that one tin check colour and mix together if necessary before use
This top coat is supplied pre accelerated and is activated with the addition of MEKP catalyst at 1% to 4% by volume. Pot life at 20degC. using 2% catalyst is approximately 20 minutes. More catalyst decreases working time
Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
SikaMix Mortar Plasticiser is a ready to use plasticising and air entraining liquid admixture for mortars and plaster. Increases workability, durability and cohesion of bricklaying mortars, renders and screeds. Its chloride free formula helps prevent corrosion of steel, cracking, shrinkage and efflorescence without affecting setting time.
Marshalls Weatherpoint 365 is an all weather jointing material that will assist in speeding up installation time and reduce labour involvement. No mixing or waste involved, Weatherpoint sets like concrete. It can be stored under water and it stays workable indefinitely. Once fully cured, Weatherpoint has a comparable strength to 4:1 mortar.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
Sika®-1 Waterproofer is an aqueous solution containing complex colloidal silicates. In the presence of water these swell and block the capillaries and pores in the applied sand/cement renders, screeds and mortar to provide an effective barrier against the transmission of liquid water.
SikaMix Mortar Plasticiser is a ready to use plasticising and air entraining liquid admixture for mortars and plaster. Increases workability, durability and cohesion of bricklaying mortars, renders and screeds. Its chloride free formula helps prevent corrosion of steel, cracking, shrinkage and efflorescence without affecting setting time.
Marshalls Weatherpoint 365 is an all weather jointing material that will assist in speeding up installation time and reduce labour involvement. No mixing or waste involved, Weatherpoint sets like concrete. It can be stored under water and it stays workable indefinitely. Once fully cured, Weatherpoint has a comparable strength to 4:1 mortar.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.