Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Marshalls Paving Primer helps to eliminate high profile technical failures that may occur with increased traffic load bearing. By simply adding our paving primer between the paving and bedding mortar, you can rest assured that your patio will remain exceptionally strong for years to come. Recommended for use with all types of natural stone and porcelain paving, Marshalls paving primer comes in a 20kg plastic tub and is easy to use, requiring only the addition of water.
EASYGrout is a high-quality slurry grout for use on porcelain. EASYGrout mixes readily with water to give a highly flowable joint filling and grouting mortar ideal for use on porcelain floor surfaces where a high early strength, resilient, compact grout joint is needed.
Specially formulated for porcelain paving, ProJoint Porcelain Grout has been developed for joint widths of 2mm to 20mm and is ideal for external or internal use. The anti-mould growth technology with added silicone, helps limit mould growth and allows ProJoint Porcelain Grout to repel water from the surface of the grout, whilst allowing vapour to pass through. ProJoint Porcelain Grout is supplied in two 10kg bags, to allow the bucket to act as the ideal mixing vessel.
Brand Name
Nexus
Size
20 kg
Coverage
Coverage per 20kg, with joint size 5x20mm, slab size: 600x600mm should be approximately 37.31m2. Visit www.nexuspavingsystems.co.uk/calculator to calculate your requirements
Colour
Mid Grey
Drying Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Time to Set
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Walk On Hardness Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Marshalls Paving Primer helps to eliminate high profile technical failures that may occur with increased traffic load bearing. By simply adding our paving primer between the paving and bedding mortar, you can rest assured that your patio will remain exceptionally strong for years to come. Recommended for use with all types of natural stone and porcelain paving, Marshalls paving primer comes in a 20kg plastic tub and is easy to use, requiring only the addition of water.
EASYGrout is a high-quality slurry grout for use on porcelain. EASYGrout mixes readily with water to give a highly flowable joint filling and grouting mortar ideal for use on porcelain floor surfaces where a high early strength, resilient, compact grout joint is needed.
Specially formulated for porcelain paving, ProJoint Porcelain Grout has been developed for joint widths of 2mm to 20mm and is ideal for external or internal use. The anti-mould growth technology with added silicone, helps limit mould growth and allows ProJoint Porcelain Grout to repel water from the surface of the grout, whilst allowing vapour to pass through. ProJoint Porcelain Grout is supplied in two 10kg bags, to allow the bucket to act as the ideal mixing vessel.