The product can be applied in one application to depths between 3mm and 6mm
Setcrete™ Universal takes approximately 24 hours at to fully dry, so that floor coverings can be laid on top. However, after 3 hours it is hard enough for you to walk on.
Setcrete™ Universal is suitable to use over a wide range of absorbent sub floors, which should first be coated with Setcrete™ Acrylic Primer diluted in a ratio of 1 part primer to 4 parts water
For non-absorbent sub floors, the surface should first be primed with un-diluted Setcrete™ Acrylic Primer
The working time for use is approximately 15 – 20 minutes at 20°C, depending upon the sub floor absorbency, ambient temperature and humidity. Do not mix more than one bag at a time
Setcrete™ Universal is not suitable for use when bonding solid wood flooring. All other Setcrete™ floor levelling compounds are suitable for installation of this type of flooring
For further information and technical advice regarding the use of Setcrete™ Universal, please email the Technical Services Department - contact@setcrete.co.uk
MOULDAWAY is the perfect solution for sanitising most hard surfaces. It is particularly suitable for the removal of pink and black mould from shower stall walls, from the grout between bathroom tiles and from shower curtains. It's triple action formula covers a broad spectrum of issues and provides the one product, one treatment solution needed in today's complex environment.
Pavetuf Jointing Compound can be used externally in all weathers. Providing a granular finish and available in Black, Buff and Grey, this ready mixed jointing product is super simple to use making it a great option for DIYers.
Setcrete™ Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared.
MOULDAWAY is the perfect solution for sanitising most hard surfaces. It is particularly suitable for the removal of pink and black mould from shower stall walls, from the grout between bathroom tiles and from shower curtains. It's triple action formula covers a broad spectrum of issues and provides the one product, one treatment solution needed in today's complex environment.
Setcrete™ Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared.