Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Overview
- The industry standard timber hanger for solid joists
- Speed prongs provide a temporary fix for an even quicker installation
- A location tab in the bottom of the hanger allows quick and accurate alignment
- Wider than normal strap ensures maximum contact where it counts
- Face fix or wrap over installation
- Up to 5.5kN Long Term Safe Working Load
Technical specification
Height
234 mm
Thickness
0.9 mm
Width
91 mm
Material
Pre-Galvanised Steel
Finish
Galvanised
Pack Quantity
60
Type
Joist Hanger
Manufacturer Model No
JHA270/91
Brand Name
Simpson Strong-Tie
Range Description
Builder Metalwork
Reviews
Be the first to review this product.
Simpson JHA270/75 Timber to Timber Joist Hanger
JHAs are height-adjustable joist hangers used to support timber joists from timber members. This can be fitted quickly and accurately due to the adjustable height strap, location tab, and speed prongs.
This product is the standard leg (JHA270) version and can be installed directly on the bearing joist or wrapped over the top to achieve higher performance.
£1.68 each (Inc. VAT)
Simpson Strong Tie 120 x 55 x 30mm Adjustable Reinforced Angle Bracket (Box of 50)
The Simpson EFIXR range of brackets are adjustable angle brackets with 2 obround fixing holes. The EFIXR angle brackets are intended for all assemblies and installations of interior and exterior joinery. The reinforcing notch improves stiffness & rigidity.
£131.40 per box (Inc. VAT)
Simpson Strong-Tie Masonry Supported Joist Hanger 150 mm x 47 mm JHM150/47
The JHM range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams.
£1.63 each (Inc. VAT)
Simpson Strong-Tie Girder Truss Clip 47 mm wide TCP47
The TCP47 truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint.
£0.60 each (Inc. VAT)