Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
Adesilex P9 is a high grab, high strength cement-based powder adhesive ideal for the installation of porous bodied glazed tiles or porcelain tiles on walls. Also suitable for floors where speed of installation is not important.
Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible white grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Bostik MC250 Vitri-Flex is a fast-setting, flexible wall and floor tile adhesive in white. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to wall and floors.
This white, rapid-setting wall and floor tile adhesive is formulated for fast track installation and enables tiles to be grouted in approximately 2 to 3 hours after fixing, depending on conditions. It provides excellent grip and adhesion.
Bostik Vitri-Flex tile adhesive is suitable for most interior and exterior installations including more demanding installations, such as use with underfloor heating and areas subject to limited vibration. When fully cured the adhesive is suitable for permanently wet areas such as showers. It will bond to concrete, plaster, sand/cement render and screeds, blockwork, brickwork, glazed surfaces, vinyl tiles, plywood overlay and more.
One of Bostik's best adhesives for vitrified tiles. Available in a 20kg bag.
Suitable for
Suitable for wall and floor tiles including ceramic, quarry, porcelain, vitrified, natural stone and mosaics.
Also suitable for use with underfloor heating and WBP 15mm plywood overlay.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
Adesilex P9 is a high grab, high strength cement-based powder adhesive ideal for the installation of porous bodied glazed tiles or porcelain tiles on walls. Also suitable for floors where speed of installation is not important.
Bostik J115 Flexible Smooth Finish Grout is a professional quality, cementitious polymer modified grout for walls and floors. It is formulated to provide narrow and wide joints.
This flexible white grout is an easy clean off, non slump formulation and sets in 12 hours to a very hard finish. It is also mould and efflorescence resistant.
Suitable for use with a variety of tile types including ceramic, porcelain, natural stone, mosaic, marble and quarry tiles. It is suitable for joints between 2mm and 15mm for both interior and exterior use.
Bostik MC250 Vitri-Flex is a fast-setting, flexible wall and floor tile adhesive in white. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to wall and floors.
This white, rapid-setting wall and floor tile adhesive is formulated for fast track installation and enables tiles to be grouted in approximately 2 to 3 hours after fixing, depending on conditions. It provides excellent grip and adhesion.
Bostik Vitri-Flex tile adhesive is suitable for most interior and exterior installations including more demanding installations, such as use with underfloor heating and areas subject to limited vibration. When fully cured the adhesive is suitable for permanently wet areas such as showers. It will bond to concrete, plaster, sand/cement render and screeds, blockwork, brickwork, glazed surfaces, vinyl tiles, plywood overlay and more.
One of Bostik's best adhesives for vitrified tiles. Available in a 20kg bag.