Stormdry Masonry Protection Cream is a deeply penetrating water-repellent silicone cream for the protection of masonry. The thick, white cream is ready to use and applied by brush, roller or airless spray. It penetrates into brickwork, masonry, mortar and concrete, where it will cure to a colourless, natural finish, lasting for over 25 years. Stormdry Cream can help improve the energy efficiency of dwellings by reducing heat loss.
Dryzone Mould Eliminator is a bleach-based and hygienic surface cleaner designed to quickly remove mould and mildew from household surfaces. Ideal for use in bathrooms and kitchens, spray directly onto mould and mildew affected surfaces. Once applied, the powerful formula acts immediately and usually eliminates mould in less than three minutes before being washed away to reveal a clean and mould-free surface.
Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against high water pressure infiltration when mixed with water and ordinary Portland cement.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
Stormdry Masonry Protection Cream is a deeply penetrating water-repellent silicone cream for the protection of masonry. The thick, white cream is ready to use and applied by brush, roller or airless spray. It penetrates into brickwork, masonry, mortar and concrete, where it will cure to a colourless, natural finish, lasting for over 25 years. Stormdry Cream can help improve the energy efficiency of dwellings by reducing heat loss.
Dryzone Mould Eliminator is a bleach-based and hygienic surface cleaner designed to quickly remove mould and mildew from household surfaces. Ideal for use in bathrooms and kitchens, spray directly onto mould and mildew affected surfaces. Once applied, the powerful formula acts immediately and usually eliminates mould in less than three minutes before being washed away to reveal a clean and mould-free surface.
Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against high water pressure infiltration when mixed with water and ordinary Portland cement.
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.