SikaMix Mortar Plasticiser is a ready to use plasticising and air entraining liquid admixture for mortars and plaster. Increases workability, durability and cohesion of bricklaying mortars, renders and screeds. Its chloride free formula helps prevent corrosion of steel, cracking, shrinkage and efflorescence without affecting setting time.
RLT BACTDET 05 is the first stage of MGC's Mould Eradication Treatment and used for killing and removing mould from contaminated surfaces. The product is soapy in consistency and supplied in concentrated form in 1 and 5 litre containers which should be diluted at 1:4 with warm or cold water. Apply the diluted product by brush, cloth or sponge to the infected surfaces extending the treatment 1 metre beyond visible signs of mould removing as much of the contamination as possible. This stage of the treatment will kill the mould, stop it spreading to other areas and clean the surfaces.
Size
5 L
Suitable for
Amateur and Professional first stage treatment for the long term eradication of mould contamination to interior walls and ceilings
Interior or Exterior Use
Interior use
Container Type
Plastic jerry can
Application Method
Cloth, sponge or brush
Type
Concentrate
Pack Quantity
1
Certifications Met
Approved under C.O.P.R.1986 (as amended) by the Health and Safety Executive Registration No 8144
The Setcrete 2K Pro Liquid (5L) is the dedicated gauging liquid designed specifically for use with Setcrete 2K Pro Powder. Together, they form a high-performance, two-part water-mix replacement system that excels in demanding refurbishment environments where speed and adhesion are critical.
Note: This product is the liquid component only. For a complete levelling solution, ensure you have the Setcrete 2K Pro 20kg Powder to hand.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.
SikaMix Mortar Plasticiser is a ready to use plasticising and air entraining liquid admixture for mortars and plaster. Increases workability, durability and cohesion of bricklaying mortars, renders and screeds. Its chloride free formula helps prevent corrosion of steel, cracking, shrinkage and efflorescence without affecting setting time.
RLT BACTDET 05 is the first stage of MGC's Mould Eradication Treatment and used for killing and removing mould from contaminated surfaces. The product is soapy in consistency and supplied in concentrated form in 1 and 5 litre containers which should be diluted at 1:4 with warm or cold water. Apply the diluted product by brush, cloth or sponge to the infected surfaces extending the treatment 1 metre beyond visible signs of mould removing as much of the contamination as possible. This stage of the treatment will kill the mould, stop it spreading to other areas and clean the surfaces.
The Setcrete 2K Pro Liquid (5L) is the dedicated gauging liquid designed specifically for use with Setcrete 2K Pro Powder. Together, they form a high-performance, two-part water-mix replacement system that excels in demanding refurbishment environments where speed and adhesion are critical.
Note: This product is the liquid component only. For a complete levelling solution, ensure you have the Setcrete 2K Pro 20kg Powder to hand.
A radical chemical blend containing a sophisticated mixture of alkaline materials and wetting agents to attack varied types of blockages whether caused by hair, grease, fat, oils, etc.. Heavier than water the unique formula holds the active chemicals together, allowing them to sink to the source of the problem with minimum loss of activity.