Modern contemporary metal garden railing panels. Fits a post to post Gap of 1830mm x 395mm high. Electro-galvanized for added rust resistance and powder coated black. Galvanizing is not a 100% rustproof guarantee if the coating is damaged or chipped it will need to be touched up. Moving parts will need to be touched up on a regular basis. Fittings included to mount to brickwork or metal or wooden posts, no screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal 25x6mm frames with 6mm and 10mm diameter infill bars. Optional 50mm square x 500mm high bolt-down blank metal posts available.
Constructed using double waney edge slats that are secured into a neat fully mortise and tenon-jointed frame, making it stronger than a traditional panel.
Balmoral premium range spear top railing panel with rings. Balmoral range is usually made to order, delivery is around 4-6 weeks. There may be occasions that a size is available for faster delivery. Please call to check stocks if you require urgent delivery. Solid steel construction. Heavy duty 40mm x 10mm frames. Infill bars 16mm diameter solid metal. Fittings included for easy installation onto brickwork, metal or timber posts (no screws or wall plugs included). Limited Made-to-Measure is available in this range due to the fixed rings size, please call for a quote. Finish: Electro-galvanised (ZP within the product code) provides added rust resistance and is powder coated black. Other product codes are only primed black and must be top coat painted after installation. Fits a total post to post GAP of 1830mm (6ft). Frame height is 407mm and 560mm to top of spear finial. We already account for the hinge gaps within the width measurement listed. The upgraded electro galvanised finish provides added rust resistance and is powder coated black, should be inspected periodically and any chips paint touched up. Note: the galvanising is not a 100% rust proof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Fittings included; hinge angle brackets and bolts. (No screws or wall plugs included) Nuts and bolts must be painted after fitting to prevent the onset of rust. Metal product made to a physical height and designed to fit an opening as stated.
The gate is made from heavy-duty and high-quality metal. Fence and railing panels fit a total post to post gap of 1830mm. The fence height to top of hoops is 950mm. The fence frame height is 820mm. The hinge and latch gaps are already accounted for. The physical width of the fence is less than the listed width. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Optional 50mm square concrete-in blank metal posts for the gate or the fence.
Modern contemporary metal garden railing panels. Fits a post to post Gap of 1830mm x 395mm high. Electro-galvanized for added rust resistance and powder coated black. Galvanizing is not a 100% rustproof guarantee if the coating is damaged or chipped it will need to be touched up. Moving parts will need to be touched up on a regular basis. Fittings included to mount to brickwork or metal or wooden posts, no screws included. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal 25x6mm frames with 6mm and 10mm diameter infill bars. Optional 50mm square x 500mm high bolt-down blank metal posts available.
Constructed using double waney edge slats that are secured into a neat fully mortise and tenon-jointed frame, making it stronger than a traditional panel.
Balmoral premium range spear top railing panel with rings. Balmoral range is usually made to order, delivery is around 4-6 weeks. There may be occasions that a size is available for faster delivery. Please call to check stocks if you require urgent delivery. Solid steel construction. Heavy duty 40mm x 10mm frames. Infill bars 16mm diameter solid metal. Fittings included for easy installation onto brickwork, metal or timber posts (no screws or wall plugs included). Limited Made-to-Measure is available in this range due to the fixed rings size, please call for a quote. Finish: Electro-galvanised (ZP within the product code) provides added rust resistance and is powder coated black. Other product codes are only primed black and must be top coat painted after installation. Fits a total post to post GAP of 1830mm (6ft). Frame height is 407mm and 560mm to top of spear finial. We already account for the hinge gaps within the width measurement listed. The upgraded electro galvanised finish provides added rust resistance and is powder coated black, should be inspected periodically and any chips paint touched up. Note: the galvanising is not a 100% rust proof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Fittings included; hinge angle brackets and bolts. (No screws or wall plugs included) Nuts and bolts must be painted after fitting to prevent the onset of rust. Metal product made to a physical height and designed to fit an opening as stated.
The gate is made from heavy-duty and high-quality metal. Fence and railing panels fit a total post to post gap of 1830mm. The fence height to top of hoops is 950mm. The fence frame height is 820mm. The hinge and latch gaps are already accounted for. The physical width of the fence is less than the listed width. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Optional 50mm square concrete-in blank metal posts for the gate or the fence.