Saved so much time over screwing the panels on, and didn't damage them, readily removable.
Most liked negative review
Check Before Buying!
Beware the ones in stock at Macclesfield with this code were NOT the Metclip versions but of inferior quality with different fixing centres....check before you buy!
Sort reviews:
Sort reviews by:
10 results
1
Check Before Buying!
Beware the ones in stock at Macclesfield with this code were NOT the Metclip versions but of inferior quality with different fixing centres....check before you buy!
2 years ago
Graham from Northwich
Type of purchase: DIY
No, I would not recommend to a friend
1
0
2
I was updating buy it again but has to be "new"
They were alll rusted
2 years ago
Dhiru
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
4
ok
For wooden fence easy to setup having only put 2 on either side of six-foot panels.
6 years ago
Jan
Type of purchase: DIY
Yes, I would recommend to a friend
0
1
3
Thoroughly check requirement before buying.
Wasn't quite what I wanted as being impractical fir my purpose. Need to think through carefully before buying,
otherwise it's a good product.
7 years ago
Robert
Type of purchase: DIY
Yes, I would recommend to a friend
1
1
4
Good!
Good aand able to fit panels easily.
7 years ago
Elaine
0
0
5
10/10
Done the job, Used with Bullet 4.0 x 40mm Gold Wood Screw,
7 years ago
Dean
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
Saved so much time
Saved so much time over screwing the panels on, and didn't damage them, readily removable.
The gate is made from heavy-duty and high-quality metal. Fence and railing panels fit a total post to post gap of 1830mm. The fence height to top of hoops is 950mm. The fence frame height is 820mm. The hinge and latch gaps are already accounted for. The physical width of the fence is less than the listed width. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Optional 50mm square concrete-in blank metal posts for the gate or the fence.
Create the same look both sides of the post! Cover the back of the post with this cover strip in the matching post colour. Easily cut to requiried length if needed.
The ball top garden fence panel is heavy-duty and high-quality metal fencing. Fits a post to post gap of 1830mm height to top of ball finial is 915mm. The frame height is 820mm. The physical width is 1810mm because the listed sizes include the hinge gaps. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm diameter. Optional 50mm or 70mm square concrete-in metal posts available. For level ground select 1400mm long posts and for sloping ground select 1600mm long posts. For optional bolt down posts, select 50x50x960mm flat top or ball top posts.
The gate is made from heavy-duty and high-quality metal. Fence and railing panels fit a total post to post gap of 1830mm. The fence height to top of hoops is 950mm. The fence frame height is 820mm. The hinge and latch gaps are already accounted for. The physical width of the fence is less than the listed width. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and infill bars 12mm diameter. Optional 50mm square concrete-in blank metal posts for the gate or the fence.
Create the same look both sides of the post! Cover the back of the post with this cover strip in the matching post colour. Easily cut to requiried length if needed.
The ball top garden fence panel is heavy-duty and high-quality metal fencing. Fits a post to post gap of 1830mm height to top of ball finial is 915mm. The frame height is 820mm. The physical width is 1810mm because the listed sizes include the hinge gaps. Electro-galvanized for added rust resistance and powder coated black, the finish must be inspected and any chips touched up. The galvanizing is not a 100% rustproof guarantee. Like any outdoor metal product, it may need to be painted every couple of years to ensure long life. Comes with angle brackets and bolts, but no screws. Nuts and bolts must be painted after fitting to prevent the onset of rust. Made from solid metal frames 25mm x 10mm and Infill bars 12mm diameter. Optional 50mm or 70mm square concrete-in metal posts available. For level ground select 1400mm long posts and for sloping ground select 1600mm long posts. For optional bolt down posts, select 50x50x960mm flat top or ball top posts.