Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
The NDC Polipak DPC 150mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards outlined in BS 6515 (1984). Additionally, it is CE marked by EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
The NDC Polipak DPC 150mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards outlined in BS 6515 (1984). Additionally, it is CE marked by EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.