The T101B delivers clean straight cuts in wood. Its precision-ground teeth with a taper-ground body enable spotless results. Made of high carbon steel, this blade is appropriate for cutting softwood and non-abrasive woodworking materials. It is equipped with a fine progressive tooth pitch (2.7 mm) for cutting woodworking materials with 3-30 mm thickness.
The HTC EVO355 RAPTOR slices its way through mild steel with ease, the cut is extremely quick and clean, producing no heat, no burr and few sparks. The cutting capacity is incredible too, 120 x 120mm steel box section with a 6mm wall thickness.
This no-nonsense machine is economical in its performance; typically an EVO355 Raptor blade averages a jaw-dropping 900 cuts in 50 x 50mm mild steel with a wall thickness of 3mm. A true powerhouse, giving the end-user tremendous scope when it comes to cutting steel on a production basis.
Model SG1251 has been developed based on SG1250. In addition to the benefits of the current model, SG1251 features an improved trigger switch operable with the fingers of the hand holding the top handle.
Blade Diameter
125 mm
Bore Size
22.23 mm
Weight
4.50 kg
Maximum Cut at 90 Degrees
30 mm
Power Type
Corded
No Load Speed
10000RPM
Brushless
No
Wattage
1400 W
Voltage
110 V
Case
Yes
Includes
Diamond wheel. Hex wrench, lock nut wrench and carry case
Versatile Milwaukee M12 Jigsaw. Features a Quik-lok™ T-Shank blade clamp for tool free blade changes and a precision roller guide to increase control and reduces blade deviation to deliver precise and accurate cuts. Redlink plus™ intelligence system also delivers an advanced digital overload protection for the and uniquely enhances tool performance under load.
The T101B delivers clean straight cuts in wood. Its precision-ground teeth with a taper-ground body enable spotless results. Made of high carbon steel, this blade is appropriate for cutting softwood and non-abrasive woodworking materials. It is equipped with a fine progressive tooth pitch (2.7 mm) for cutting woodworking materials with 3-30 mm thickness.
The HTC EVO355 RAPTOR slices its way through mild steel with ease, the cut is extremely quick and clean, producing no heat, no burr and few sparks. The cutting capacity is incredible too, 120 x 120mm steel box section with a 6mm wall thickness.
This no-nonsense machine is economical in its performance; typically an EVO355 Raptor blade averages a jaw-dropping 900 cuts in 50 x 50mm mild steel with a wall thickness of 3mm. A true powerhouse, giving the end-user tremendous scope when it comes to cutting steel on a production basis.
Model SG1251 has been developed based on SG1250. In addition to the benefits of the current model, SG1251 features an improved trigger switch operable with the fingers of the hand holding the top handle.
Versatile Milwaukee M12 Jigsaw. Features a Quik-lok™ T-Shank blade clamp for tool free blade changes and a precision roller guide to increase control and reduces blade deviation to deliver precise and accurate cuts. Redlink plus™ intelligence system also delivers an advanced digital overload protection for the and uniquely enhances tool performance under load.