Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Solid Dense 7.3N Concrete Block Grey 100mm
4.8
118 Reviews
Hover Over to Zoom In
Frequently bought together
Overview
- Creates a good base for fixings
- Suitable for internal and external use
- Resistant to fire and sound
- BBA approved
- Conforms to BS EN ISO 9001
- Complies with BS EN 771-3
Technical specification
Height
215 mm
Fire Resistance Minutes
Up to 120 minutes (2 hours) for a load-bearing 100mm wall; up to 240 minutes (4 hours) for a non-load-bearing 100mm partition.
Reaction to Fire Euro Class
Class A1
Reaction to Fire BS476 Standard
Class 0
Length
440 mm
Width
100 mm
Weight
19 kg
Colour
Grey
Thermal Conductivity
1.08 W/mK (Internal) / 1.18 W/mK (External)
Compressive Strength
7.30 N per mm2
Fire Rating
Class A6
BBA Approved
Yes
Standards Met
BS EN 771-3
Type
Dense Block
Manufacturer Model No
1757
Brand Name
Aggregate Industries
Made To Order
N
Reviews
4.8
118 Reviews
Most liked review
Great product but lack of delivary communication
Brilliant. As described solid dense concrete block. They are solid. They are dense. They are made of concrete and the shape can be described as block like.
Only downfall was they said they would get in touch about delivary. The only contact they made was when they were sat outside my house whilst I was at work. ...
View more
H+H Celcon Standard Aerated Concrete Block 3.6N 140mm Pack of 80
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
£541.44 per pack (Inc. VAT)
H+H Celcon Solar Aerated Concrete Block 2.9N 100mm Pack of 120
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required.
£438.05 per pack (Inc. VAT)
Safeguard Drybase Fleece Overseal Tape 100MM X 20M
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
£40.24 each (Inc. VAT)
IKO Hyload Original Damp Proof Course 100mm x 20m
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UKs leading High Performance DPC
£37.42 per roll (Inc. VAT)