Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Fillcrete Expansion Joint Brickfill Roll 12mm x 150mm x 10m
5
1 Review
Hover Over to Zoom In
Frequently bought together
Overview
- Ideal low resistance expansion joint filler for brickwork and concrete blockwork
- Brickfill fully meets the British Standards for movement joints in brickwork
- All pre-cut rolls have a scored tear off strip. Simply build in Brickfill flush with the surface of the brickwork and then pull off the “tear off†strip, leaving a correctly sized recess, to allow the installation of a suitable high performance silicon sealant, without the need for a bond breaker
- Packed in merchant packs of 10 rolls
Technical specification
Length
10 m
Thickness
12 mm
Width
150 mm
Type
Expansion Joint Roll
Brand Name
Brickfill
Safeguard Drybase Plaster Membrane Kit 10m
The Drybase Plaster Membrane Kit is an easy-to-use way to prepare damp walls for replastering with traditional plasters or plasterboards. It is the ideal solution for high-speed damp-proof replastering jobs. This kit comes with all the equipment you need to replaster 10 m2 of wall.
£134.75 each (Inc. VAT)
Sovereign 30806087 CDM3 Lath Mesh Membrane Roll 2M x 20M
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
£416.00 each (Inc. VAT)
Sovereign 30616226 Fleeced Overseal Tape 10M
Sovereign Fleeced Overseal Tape is a synthetic butyl/rubber based preformed strip sealant laminated with a non woven polyester fleece. It's primarily used for creating a joint overseal where SovDrain Cavity Drain Membranes are used.
£61.33 each (Inc. VAT)
Sovereign 30806090 CDM8 Membrane Roll 2.4M x 20M
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£365.94 each (Inc. VAT)